Autoscan Mode - Belkin OmniView PRO2 Rack User Manual

Using the Console

AutoScan Mode

The AutoScan feature allows you to set your Console to scan and monitor the
activities of all connected servers one by one. The Console remains on one server for
a preset number of seconds, before switching to the next server. The time interval
allotted for each server can be adjusted through the OSD menu (see the "AutoScan
Time" section on page 23).
When the Console is in AutoScan mode, it is also in View-Only mode. This means that
input from the keyboard and mouse touch pad will not be transmitted to the server in
focus. Cancel AutoScan to regain control of the server.
To activate the AutoScan function, press "Scroll Lock", "Scroll Lock", "A" on the
keyboard.
To disable AutoScan, press any key on the keyboard.
Note: There is no mouse or keyboard control in AutoScan mode. This is
necessary to prevent data and synchronization errors. If the user is using the
mouse or keyboard when the Console is switching between ports, data flow
may become interrupted and could result in erratic mouse movement and/or
wrong-character input when using the keyboard.
1
2
3
4
5
6
7
8
24