Belkin OmniView PRO2 Rack User Manual page 26

Using the Console
A " " symbol indicates that the connected server is powered up. If the OSD menu
does not display a " " symbol for a server that is connected and powered up, you
will need to reset the Console to re-detect the server. This is done by simultaneously
pressing the "BANK +" and "BANK –" buttons on the front panel.
OSD-Menu Keyboard Commands
Command
Page Up/Page Down
Insert
Enter
Tab
Esc
To switch servers using the main OSD menu, use the arrow keys on your keyboard
to navigate to the desired server and press the "Enter" key. A "
which server is currently being accessed by the Console.
To change the name of a server, use the arrow keys to navigate to the desired server,
press the "Insert" key, type in the new name, and press "Enter" to save the entry. You
may use up to 15 characters for each server name.
Function
Navigate to different servers in the same BANK
Select next or previous BANK
Highlight server name for editing
Switch servers
Open the "Setup Menu" page
Exit the OSD
" symbol indicates
1
2
3
4
5
6
7
8
26