Installing The Switch; Mounting The Engine - Seagull Models Husky Assembly Manual

Throttle servo.
THROTTLE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm as same as picture below:
Loctite secure.
1 PCS.
www.seagullmodels.com
Adjustable Servo
connector.
Servo arm.
Throttle servo arm.
3x10 mm

INSTALLING THE SWITCH.

Install the switch into the precut hole in the
side, in the fuselage.
Recomend mounting switch inside fuselage if
using floats.
Cut Covering.
Switch Installation.

MOUNTING THE ENGINE.

1) Position the engine with the drive washer
(145mm) forward of the firewall as shown.
3/ 32" Hole.
11