Engine Mount Installation - Seagull Models Husky Assembly Manual

CHRISTEN HUSKY
Thread locker glue
M4x20mm
M4x20mm
INSTALLING WHEEL PANTS TO
MAIN LADING GEAR.
Landing Gear.
C/A glue.
8
M4x20mm
wheel Pant.
Instruction Manual.
Locker glue.

ENGINE MOUNT INSTALLATION.

1) Locate the items necessary to install the
engine mount included with your model. .
4x30mm.
2) Use four 4x30mm head bolts and four 4mm
washers to attach the engine mount rails to
the firewall. Tighten the screws . Make sure to
use threadlock on the screws to help prevent
them from vibrating loose.
Thread locker glue.