NEC Express5800/R320a-E4 User Manual page 147

Installing and Using Utilities 5-17
Portmap
ESMPRO/ServerAgent uses the function of portmap.
If portmap stops or reactives while operating ESMPRO/ServerAgent, ESMPRO/ServerAgent
cannot be normally operated. Please execute the following commands, and reactivate
ESMPRO/ServerAgent.
# /opt/nec/esmpro_sa/bin/ESMRestart.
Maintenance-related Functions
When you want to use maintenance-related functions of the NEC Express5800/ft series, contact
your maintenance personnel.
CPU Information
If you select [CPU Module] – [CPU] in the [ft] tree of the DataViewer, unknown or incorrect
information appears in some information items.
The CPU information can be viewed by selecting [System] – [CPU] in the [ESMPRO] tree.
Change of Installation States of CPU and PCI Modules
If you dynamically change the configuration of the CPU or PCI module in the relevant system
during review of the server information by using the DataViewer, the information in the DataViewer
may be different from the current system information because the change of the system
configuration is not reflected on the DataViewer. Please execute the following commands, and
reactivate ESMPRO/ServerAgent.
# /opt/nec/esmpro_sa/bin/ESMRestart
In addition, please restart ft server utility when it started ft server utility.