NEC Express5800/R320a-E4 User Manual page 98

4-12 System Configuration
I/O Device Configuration
When you select "I/O Device Configuration" in the Advanced menu, the following screen appears.
If you select a menu with the "►" mark and press Enter, its submenu appears.
Refer to the table below for information on options.
Option Parameter
Serial Port 1 Enabled
[Disabled]
Auto
Base I/O address [3F8/IRQ4]
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Serial Port 1 [Serial
Connection Connector]
Internal
Modem
Serial Port 2 Enabled
[Disabled]
Auto
Description
Specify whether or not to enable Serial Port 1.
Specify the I/O address and IRQ of Serial Port 1.
Specify Serial Connector or Internal Modem for
Serial Port 1 connection.
Specify whether or not to enable Serial Port 2.