Monitoring Ethernet adapter on PCI module
To monitor the Ethernet adapters on the PCI modules, see the [Ethernet Board] tree.
To see the information on the [Ethernet Board] tree, select [PCI Module] [PCI module (connected to
the Ethernet adapter to be seen)] [Ethernet Board] of the [ft] tree.
You can see the following information on the Ethernet adapters in the [Ethernet Board] tree.
IMPORTANT:
When there is unused Ethernet adapter, ESMPRO Agent determines that the port is faulty (does not
have any media), and the status color of [ft] - [PCI module] - [Ethernet Board] of the DataViewer
turns red (abnormal). The server status color of the integrated viewer also turns red (abnormal).
You need to connect the PCI module 0 and the PCI module 1 with the cross LAN cable when these
Ethernet ports are not in use.
General
This allows the ethernet configuration
information to be viewed.
Detail
This allows the communication data of the ethernet adaptor to be viewed.
Installing and Using Utilities 5-33