NEC Express5800/R320a-E4 User Manual page 226

7-18 Troubleshooting
Server console screen does not appear on the web Remote KVM console screen:
Did you set the server's screen resolution properly?
→
When you display the server screen by using the remote KVM in the Remote
Management function, set the screen resolution 1024 x 768 and the refresh rate
should be less than 75Hz.
Forgot login name/password for the Remote Management Function on the web
browser:
→
Refer to Chapter 4 on BMC configuration jumper. By changing the jumper
position, the BMC configuration including the password returns to the factory
default setting.
IMPORTANT:
After the operation, the BMC configuration for connecting to the DianaScope and to the
server will be lost. If you are already using the DianaScope, save the configuration on
FloppyDisk before this operation, then configure again. You can change/save the BMC
configuration on the system management function of DianaScope or EXPRESSBUILDER.