NEC Express5800/R320a-E4 User Manual page 146

5-16 Installing and Using Utilities
Supplement
Note the followings when using NEC ESMPRO Agent.
Notice on running NEC ESMPRO Agent
NEC ESMPRO Agent sometimes cannot send alert report after recovering from hardware failure.
[Workaround]
Execute the following procedure after recovering from hardware failure.
After replacing the hardware, confirm both of the CPU/IO module status lamp 2s turn green
(duplex), login as a root user, and then run the following command.
# /opt/nec/esmpro_sa/bin/ESMRestart
For status lamp positions, refer to "Names and Functions of Components" in Chapter 2 "General
Description" in User's Guide.
Displaying ft Server utility
When you start ft server utility starts by using GNME terminals from X Windows or console
command, the right part of the initial screen goes beyond the screen by defaults. There is no
problem on using the utility as it is. The screen refreshes and back to normal when you press
[Ctrl]+[L].