NEC Express5800/R320a-E4 User Manual page 184

5-54 Installing and Using Utilities
3. Select <Update> of firmware update.
When update is started, the following messages are output by a syslog
kernel: EVLOG: INFORMATION - BMC nn/120, firmware burn starting.
TIPS: The case that the hues of the screen are different has newt using for the screen display
by influence of packaging it, but an initial position with the firmware screen is a
position of the "< Update >".
4. [Enter the file location of the new firmware] in the input box in step 1 is saved, and select the
[Activate]. Perform the firmware update.
When update is completed, the following messages are output by a syslog.
kernel: EVLOG: INFORMATION - BMC nn/120, firmware burn succeeded
TIPS: When the following error message was displayed, please check the file location of the
new firmware.
- The length of the file name must between 1 and 255 characters.
- Update file does not exist.
5. If the BMC firmware update of one CPU module is completed, you select other BMC, and
Sample screen of ft server utility
［BMC］