NEC Express5800/R320a-E4 User Manual page 106

4-20 System Configuration
Server
Move the cursor onto [Server] to display the Server menu.
The following describes options you can configure in the Server menu and their functions.
Select an option with the "►" mark and press Enter to display its submenu.
Refer to the table below for information on options.
Option Parameter
Post Error Disabled
Pause
[Enabled]
AC LINK Stay Off
[Last State]
Power On
Power ON [180]-255(s)
Delay Time
Description
Set whether or not to pause POST at the end
of POST if an error has occurred during
POST execution.
Specify the AC LINK feature by selecting the
status of the power supply unit of the server
when the AC power supply restarts. (See the
following table for details.) When "Power On"
and "Last State" are set, the system can be
started after waiting for both CPU/IO modules
to be mounted up to 180 seconds in addition
to the delay time of "Power On Delay Time".
Set the DC ON delay time if AC LINK is set to
"Power On" or "Last State" (unit: second).
[ ]: factory default