NEC Express5800/R320a-E4 User Manual page 113

See the table below for setup options on the screen.
Option
LAN Connection
[Auto Negotiation]
Type
100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
IP Address [192.168.001.001]
[255.255.255.000]
Subnet Mask
[000.000.000.000]
Default Gateway
[Disabled]
DHCP
Enabled

Web Interface
[Disabled]
HTTP
Enabled
[80]
HTTP Port Number
[Disabled]
HTTPS
Enabled
[443]
HTTPS Port
Number

Command Port
Number
[Disabled]
Telnet
Enabled
[23]
Telnet Port Number
[Disabled]
SSH
Enabled
[22]
SSH Port Number
[Enter]
Clear BMC
Configuration
Parameter
Set the connection type of the Management
LAN.
Set the IP address for the Management LAN.
Set the subnet mask for the Management LAN.
Set the gateway for the Management LAN.
Set "Enabled" to automatically acquire an IP
address from the DHCP server. Set "Disabled"
when you specify the IP address.

Set "Enabled" if you use communication via
HTTP, a web interface.
Set the TCP port number for the Management
LAN to communicate via HTTP.
Set "Enabled" if you use communication via
HTTPS, a web interface.
Set the TPC port number for the Management
LAN to communicate via HTTPS.

Set "Enabled" when you use Telnet-connected
communication as the command line interface
communication.
Set the TCP port number when you use
Telnet-connected communication.
Set the TCP port number when you use
SSH-connected communication as the command
line interface.
Set the TCP port number when you use
SSH-connected communication.
Click [Enter] and then select [Yes] to initialize
BMC Configuration.
System Configuration 4-27
Description
[ ]: factory default