NEC Express5800/R320a-E4 User Manual page 73

=====
1 sda (sdq)
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 sdd (sdr)
10 -
11 -
12 -
13 -
14 -
15 -
16 -
-
Command action
1 List RAID Arrays
2 List Internal Disks
3 Make Mirroring Arrays (RAID1)
4 Repair Mirroring Arrays (RAID1)
5 Delete Mirroring Arrays (RAID1)
6 Remove Disk Partitions (RAID1)
7 Make Striping Array
8 Delete Striping Array (RAID1+0)
c Configurations
q Quit
Command: 4 (If the system does not synchronized the replaced
disk automatically, execute the below command to restore
to the RAID configuration manually.)
[Repair
Arrays(RAID1)]
* Which SCSI SLOT? [1-16] 9
Command action
1 List RAID Arrays
2 List Internal Disks
3 Make Mirroring Arrays
4 Repair Mirroring Arrays (RAID1)
5 Delete Mirroring Arrays (RAID1)
6 Remove Disk Partitions (RAID1)
7 Make Striping Array
8 Delete Striping Array
c Configurations
q Quit
Command: 1 (Check if the resynchronization process is
started.)
[3] AAA/BBB/#CCC h5c0t12810
[3] AAA/BBB/#CCC h6c0t12810
(RAID1+0)
Mirroring
(RAID1)
(RAID1+0)
(RAID1+0)
Linux Setup and Operation 3-7