Professional Mode Features - Stratasys Objet1000 Plus User Manual

Objet1000 Plus User Guide

Professional Mode Features

Some advanced features of Objet Studio are only accessible in Professional
Mode.
To see the current Objet Studio setting:
➢ Open the Tools menu.
To change the Professional Mode setting:
1. From the Tools menu, select Professional Mode.
2. Close and re-open Objet Studio to use the Professional Mode features.
DOC-06810 Rev. B
Figure 5-90 Tools menu, showing Professional Mode selected
If Professional Mode is selected, advanced features are displayed.
The following message is displayed, reminding you that the change will
only take effect the next time you open Objet Studio—even though the
check mark next to the Professional Mode option appears immediately.
Figure 5-91 Configuration-change message
5 Using Objet Studio
5-69