Objet1000 Plus User Guide
Tray
The default perspective of the build tray is "isometric." You can change the
Perspective
perspective of the active window with one of ten options.
To change the perspective of the build tray in the active window:
1. On the Tray Settings ribbon, open the Perspective flyout toolbar.
Figure 5-57 Perspective toolbar
2. Click the icon that represents the desired perspective.
Tray Positioning To view the tray and models from different directions, you can move the tray
around the screen and change its display angle.
To move the tray in the Objet Studio screen:
➢ Press the mouse wheel while moving the mouse.
Figure 5-58 Tray after moving it in the Objet Studio display
DOC-06810 Rev. B
5 Using Objet Studio
5-45