Changing The Input Display - Onkyo TX-NR905 Instruction Manual

First Time Setup—Continued
5 Press the [SETUP] button.
Setup closes.
Notes:
• For composite video and S-Video upconversion for
the COMPONENT VIDEO OUT, the HDMI Mon-
itor setting must be set to No (see page 52). See
page 34 for more information on video signal flow and
upconversion.
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.

Changing the Input Display

If you connect an -capable Onkyo MiniDisc
recorder, CD recorder, or RI Dock to the TAPE IN/OUT
jacks, or connect an RI Dock to the GAME/TV jacks, for
to work properly, you must change this setting.
This setting can only be changed on the AV receiver.
1, 2
STANDBY/ON
STANDBY
READY
ZONE 2
ZONE 3
PURE AUDIO AUDIO SEL DVD VCR/DVR CBL/SAT GAME/TV AUX 1
ZONE 2 OFF LEVEL TONE HDMI OUT STEREO THX
TUNING
PHONES POWER RT/PTY/TP MEMORY MODE
CLEAR
ON OFF
ZONE 3 DIGITAL INPUT LISTENING MODE
1
Press the [TAPE] or [GAME/TV]
input selector button so that
"TAPE" or "GAME/TV" appears
on the display.
TAPE
or
GAME/TV
2 Press and hold down the [TAPE]
or [GAME/TV] input selector but-
ton (about 3 seconds) to change
the setting.
TAPE
Repeat this step to select MD, CDR, or
or
DOCK.
For the TAPE input selector, the setting
GAME/TV changes in this order:
→
TAPE MD
DOCK
For the GAME/TV input selector, the
setting changes in this order:
GAME/TV
Note:
• DOCK can be selected for the TAPE input selector or
GAME/TV input selector, but not both at the same
time.
1, 2
MASTER VOLUME
AUX 2 TAPE TUNER CD PHONO NET/USB DISPLAY
PUSH TO OPEN
TUNING
RETURN
SETUP MIC AUX 2 INPUT
SETUP
USB
PRESET
VIDEO L AUDIO R
S VIDEO DIGITAL
ENTER
TUNING
→
CDR
→
↔
DOCK
57