Selecting Audio Inputs; Specifying The Digital Signal Format - Onkyo TX-NR905 Instruction Manual

Common Functions—Continued

Selecting Audio Inputs

AUDIO SEL
If you connect a component to more than one audio
input, such as a DVD player connected to analog, digital,
multichannel, and HDMI inputs, you can use the
[AUDIO SEL] button to select which audio input you
want to use to listen to that component.
Press the [AUDIO SEL] button
repeatedly to select an audio
AUDIO SEL
input: HDMI > Auto > Multich >
Analog.
HDMI: Selects the assigned HDMI
Auto: Selects the assigned COAX-
Multich:Selects the multichannel
Analog: Selects the analog input, and
78
REC PLAYLIST RANDOM
SP A SP B
LISTENING MODE
STEREO SURR
REPEAT AUDIO SUBTITLE PLAY MODE
PURE A DIRECT THX ALL ST
TEST TONE CH SEL LEVEL- LEVEL+
OPEN/CLOSE VIDEO OFF
AUDIO SEL L NIGHT Re-EQ
VCR VCR DVD DVD HDD HDD
687
RC- M
IN, and the HDMI indicator
appears on the display. (The
HDMI IN must already be
assigned to the current input
selector. See page 54.)
IAL or OPTICAL DIGITAL
IN, and the DIGITAL indica-
tor appears on the display.
(The DIGITAL IN must
already be assigned to the
current input selector. See
page 58.) If there is no digital
signal, the analog input is
used instead.
input, and the ANALOG indi-
cator appears on the display.
(The multichannel input must
already be assigned to the
current input selector. See
page 59.)
the ANALOG indicator
appears on the display.

Specifying the Digital Signal Format

1 2
STANDBY/ON
STANDBY
READY
ZONE 2
ZONE 3
PURE AUDIO AUDIO SEL DVD VCR/DVR CBL/SAT GAME/TV
ZONE 2 OFF LEVEL TONE HDMI OUT STEREO THX
PHONES POWER
RT/PTY/TP MEMORY
ON OFF
ZONE 3 DIGITAL INPUT LISTENING MODE
Normally, the AV receiver detects the format of digital
input signals automatically. However, if you experience
either of the following issues when playing PCM or DTS
sources, you can specify the signal format manually.
• If the beginnings of tracks from a PCM source are cut
off, try the PCM setting.
• If noise is produced when fast forwarding or rewind-
ing a DTS CD, try the DTS setting.
1
Press the [AUDIO SEL] button
repeatedly to select Auto.
AUDIO SEL
2
While "Auto" is shown on the dis-
play, use the Left and Right
[ ]/[ ] buttons to select:
PCM: Only input signals in PCM
DTS: Only input signals in DTS
Auto (default): The format is detected
MASTER VOLUME
AUX 1 AUX 2 TAPE TUNER CD PHONO NET/USB DISPLAY
PUSH TO OPEN
TUNING
RETURN
SETUP MIC AUX 2 INPUT
TUNING
MODE SETUP USB
PRESET
CLEAR
S VIDEO VIDEO L AUDIO R DIGITAL
ENTER
TUNING
format are output, and the
PCM indicator lights up. The
indicator flashes if the input
signal is not PCM.
format are output, and the
DTS indicator lights up. The
indicator flashes if the input
signal is not DTS.
automatically. If no digital
input signal is present, the
analog input is used instead.