Onkyo TX-NR905 Instruction Manual page 35

Onkyo av receiver owner's manual
Hide thumbs Also See for TX-NR905:
Table of Contents

Advertisement

Connecting Your Components—Continued
■ HDMI Monitor Setting Set to No
With the HDMI Monitor setting set to No (see
page 52), video input signals flow through the
AV receiver as shown, with composite video
and S-Video sources being upconverted for the
component video output. Use this setting if
you connect the AV receiver's COMPO-
NENT VIDEO OUT to your TV.
Composite video is upconverted to S-Video
and S-Video is downconverted to composite
video. Note that these conversions only apply
to the MONITOR OUT V and S outputs, not
the VCR/DVR OUT V and S outputs.
The composite video, S-Video, and component
video outputs pass through their respective
input signals as they are.
This signal flow also applies when the Monitor
Out Resolution setting is set to Through (see
page 52).
Video Signal Flow and the Resolution Setting
When the HDMI Monitor setting is set to No
(see page 52), if the Monitor Out Resolution
setting is set to anything other than Through
(see page 52), the video signal flow will be as
shown here, with composite video and S-Video
sources being upconverted for the component
video output.
The composite video, S-Video, and component
video outputs pass through their respective
analog input signals as they are. HDMI input
signals are not output.
Audio Connection Formats
Audio equipment can be connected to the AV
receiver by using any of the following audio
connection formats: analog, optical, coaxial,
analog multichannel, or HDMI.
When choosing a connection format, bear in
mind that the AV receiver does not convert dig-
ital input signals for analog line outputs and
vice versa. For example, audio signals con-
nected to an optical or coaxial digital input are
not output by the analog TAPE OUT.
Video Signal Flow Chart
DVD player, etc.
Composite
AV receiver
Composite
TV, projector, etc.
Video Signal Flow Chart
DVD player, etc.
Composite
AV receiver
Composite
TV, projector, etc.
Audio Signal Flow Chart
DVD player, etc.
HDMI
AV receiver
HDMI
1 Depends on the HDMI Audio Out setting (see page 109).
*
MD recorder, etc.
2 Only the front L/R channels are output.
*
S-Video
Component
IN
MONITOR OUT
S-Video
Component
S-Video
Component
IN
MONITOR OUT
S-Video
Component
Optical
Coaxial
Analog
Multichannel
Optical
Analog
HDMI
HDMI
HDMI
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tx-nr905s - tx nr905 av network receiver

Table of Contents