Component Video Input Setup - Onkyo TX-NR905 Instruction Manual

First Time Setup—Continued

Component Video Input Setup

2, 3
1, 5
PREV
CH
If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 3, you must assign COM-
PONENT VIDEO IN 3 to the DVD input selector.
By default, the DVD input selector is assigned to COM-
PONENT VIDEO IN 1, and all of the other input selec-
tors (i.e., VCR/DVR, CBL/SAT, GAME/TV, AUX 1,
AUX 2) are assigned to the "- - -" option.
If you've connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are upcon-
verted ( ) and output by the COMPONENT VIDEO
*
OUT. You can set this for each input selector by selecting
the "- - -" option.
Composite video, S-Video
Composite video, S-Video
56
ON STANDBY
TV
INPUT
DVD VCR/DVR CBL/SAT
+
1 2 3
GAME/TV AUX 1 AUX 2 TV CH
-
4 5 6
TAPE TUNER CD
7 8 9
TV VOL
PHONO NET/USB D. TUN
+10
0 CLEAR
--/--- 10 11 12
INPUT SELECTOR
MACRO
1 2 3 ZONE 3
REMOTE MODE
DVD VCR CD ZONE 2
CDR/MD/DOCK
1
TV CABLE NET/USB RECEIVER
SAT TAPE/AMP
DIMMER SLEEP
2–4
+
CH
VOL
ENTER
DISC
ALBUM
-
DISPLAY MUTING
REC RANDOM
PLAYLIST
SP A SP B
LISTENING MODE
STEREO SURR
REPEAT AUDIO SUBTITLE PLAY MODE
Component video
IN
( )
*
OUT
Component video
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
RECEIVER
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Input/Output
Assign," and then press
ENTER
[ENTER].
The Input/Output Assign menu
appears.
ENTER
3
Use the Up and Down [
buttons to select "3. Component
Video Input," and then press
ENTER
[ENTER].
The Component Video Input menu
appears.
1-3.Component Video Input
ENTER DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX1
AUX2
4
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
ENTER
[ ]/[ ] buttons to select:
IN1: Select if the video component
is connected to COMPO-
NENT VIDEO IN 1.
IN2: Select if the video component
is connected to COMPO-
ENTER
NENT VIDEO IN 2.
IN3: Select if the video component
is connected to COMPO-
NENT VIDEO IN 3.
- - -: Select to output composite
video and S-Video sources
from the COMPONENT
VIDEO OUT.
]/[ ]
]/[ ]
IN1
---
---
---
---
---
]/[ ]