Onkyo TX-NR905 Instruction Manual page 86

Using the Listening Modes—Continued
Onkyo Original DSP Modes
Mono Movie
This mode is suitable for old movies and other mono
sources. The center speaker outputs the sound as it is,
while reverb is applied to the sound output by the other
speakers, giving presence to even mono material.
Orchestra
Suitable for classical or operatic music, this mode
emphasizes the surround channels in order to widen the
stereo image and simulates the natural reverberation of a
large hall.
Unplugged
Suitable for acoustic instruments, vocals, and jazz, this
mode emphasizes the front stereo image, giving the
impression of being right in front of the stage.
Studio-Mix
Suitable for rock or pop music, listening to music in this
mode creates a lively sound field with a powerful acous-
tic image, like being at a club or rock concert.
TV Logic
This mode adds realistic acoustics to TV shows pro-
duced in a TV studio, surround effects to the entire
sound, and clarity to voices.
All Ch Stereo
Ideal for background music, this mode fills the entire lis-
tening area with stereo sound from the front, surround,
and surround back speakers.
Full Mono
In this mode, all speakers output the same sound in
mono, so the sound you hear is the same regardless of
where you are within the listening room.
T-D (Theater-Dimensional)
With this mode, you can enjoy virtual 5.1 surround
sound even with only two or three speakers. It works by
controlling how sounds reach the listener's left and right
ears. Good results may not be possible if there's too
much reverb, so we recommend that you use this mode
in an environment with little or no natural reverb.
Note:
• Since the Onkyo original DSP modes use the Dolby
PLIIx and Neo:6 circuits for processing, when one of
these modes is selected, the PLIIx indicator, or Neo:6
indicator for multichannel sources, lights up.
86