Onkyo TX-NR929 Owner's Manual

Onkyo TX-NR929 Owner's Manual

Owner's manual english
Hide thumbs Also See for TX-NR929:
Table of Contents

Advertisement

AV RECEIVER
TX-NR929
Instruction Manual
Contents
Table of Contents ...........................................6
Connections .................................................14
Turning On & Basic Operations..................25
Playback........................................................33
Advanced Operations ..................................57
Controlling Other Components...................87
Appendix .......................................................96
Internet Radio Guide
Remote Control Codes
E
n

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX-NR929 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Onkyo TX-NR929

  • Page 1: Table Of Contents

    Contents Safety Information and Introduction ....2 AV RECEIVER TX-NR929 Table of Contents ...........6 Connections ..........14 Turning On & Basic Operations....25 Instruction Manual Playback............33 Advanced Operations ........57 Controlling Other Components....87 Appendix ............96 Internet Radio Guide Remote Control Codes...
  • Page 2: Safety Information And Introduction

    Safety Information and Introduction 9. Do not defeat the safety purpose of the polarized B. If liquid has been spilled, or objects have fallen or grounding-type plug. A polarized plug has two into the apparatus, WARNING: blades with one wider than the other. A grounding C.
  • Page 3: Precautions

    If water or any other liquid gets –Increase the separation between the equipment cloths, thinners, alcohol, or other chemical inside this unit, have it checked by your Onkyo and receiver. solvents, because they may damage the finish or dealer.
  • Page 4 –Hereby, Onkyo Corporation, declares that this dispositif rayonnant et le corps (à l’exception des proceed as follows: TX-NR929 is in compliance with the essential extrémités : mains, poignets, pieds et chevilles). requirements and other relevant provisions of The wire which is coloured blue must be connected to For Canadian Models Directive 1999/5/EC.
  • Page 5: Supplied Accessories

    Smernice 1999/5/ES. enable you to obtain optimum performance and esenciales y otras exigencias relevantes de la –Onkyo Corporation izjavlja, da je ta TX-NR929 v listening enjoyment from your new AV Receiver. Directiva 1999/5/EC. skladu z bistvenimi zahtevami in drugimi Please retain this manual for future reference.
  • Page 6: Table Of Contents

    Changing the Icon Layout Remote Control Codes Front & Rear Panels............8 on the Network Service Screen......38 for Onkyo Components Connected via RI ..... 88 Front Panel..............8 Playing Music Files on a Server (DLNA) ....38 Resetting the REMOTE MODE Buttons ....88 Display ..............10...
  • Page 7: Features

    Inputs • 135 Watts/Channel @ 8 ohms (FTC) • Zone 2 HDMI Output • 185 Watts/Channel @ 6 ohms (IEC) • Onkyo for System Control • 230 Watts/Channel @ 6 ohms (JEITA) • 6 Digital Inputs (3 Optical/3 Coaxial) • WRAT–Wide Range Amplifier Technology •...
  • Page 8: Front & Rear Panels

    Safety Information and Introduction Front & Rear Panels Front Panel (North American models) (European and Australian models) En-8...
  • Page 9 Safety Information and Introduction For detailed information, see the pages in PHONES jack (24) parentheses. BLUETOOTH button (35, 81) ON/STANDBY button (25) ZONE 2 and ZONE 3 buttons (84) Remote control sensor (13) TONE and Tone Level buttons (58, 59) BLUETOOTH indicator (35, 81) MONITOR OUT button (62) Wi-Fi indicator (31)
  • Page 10: Display

    Safety Information and Introduction Display For detailed information, see the pages in Input indicators (22) parentheses. HDMI indicator (78) Speaker/channel indicators DIGITAL indicator Z2 (Zone 2) indicator (84) ANALOG indicator Z3 (Zone 3) indicator (84) Bi AMP indicator Listening mode and format indicators (45, 76) Audyssey indicator (28, 71) M.Opt (Music Optimizer) indicator (60) Dynamic EQ indicator (72)
  • Page 11: Rear Panel

    Safety Information and Introduction Composite video and analog audio jacks Rear Panel (BD/DVD IN, CBL/SAT IN, STB/DVR IN, GAME 1 IN, PC IN, TV/CD IN, PHONO IN) HDMI IN and HDMI output (HDMI OUT MAIN and HDMI OUT SUB/ZONE 2) jacks COMPONENT VIDEO IN and MONITOR OUT jacks IR IN and OUT jacks...
  • Page 12: Remote Controller

    MODE other than Receiver mode is selected. HOME button (56) SLEEP button (53) • You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components. See “Entering Remote Control Codes” for more details (➔...
  • Page 13 Safety Information and Introduction ■ Aiming the remote controller To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below. Remote control sensor AV receiver Approx. 16 ft. (5 m) ■ Installing the batteries Batteries (AA/R6) Note •...
  • Page 14: Connections

    Connections Speaker Configuration By using a combination of the built-in power amplifier for 9-channel and an external power amplifier for 2-channel, The following table indicates the channels you should you can enjoy up to 11.1-channel playback. use depending on the number of speakers that you Using Powered Subwoofers have.
  • Page 15 Connections Attaching the Speaker Cable Labels The speaker terminals are color-coded for identification purpose. Speaker Color Front left, Front high left, Front wide White left, Zone 2 left, Zone 3 left Front right, Front high right, Front wide right, Zone 2 right, Zone 3 right Center Green Surround left...
  • Page 16 Connections Connecting the Speaker Cables/Powered Subwoofers • Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to Please connect for 5.1-channel surround. positive (+) terminals, and negative (–) terminals only to negative (–) terminals. If you get them the ■...
  • Page 17 Connections ■ ■ 11.1-channel playback Speaker Connection Precautions Bi-amping the Front Speakers By using a combination of the built-in power amplifier • You can connect speakers with an impedance of for 9-channel and an external power amplifier for between 4 and 16 ohms. If the impedance of any of Important: 2-channel, you can enjoy up to 11.1-channel the connected speakers is 4 ohms or more, but less...
  • Page 18 Connections Using Speakers Without Crossover Network Using Dipole Speakers You can use dipole speakers for the surround and Important: surround back speakers. Dipole speakers output the • Speakers without crossover network are speakers with no built-in crossover network. same sound in two directions. •...
  • Page 19: Connecting The Tv/Av Components

    Connections Use this jack to connect to the game consoles, Connecting the TV/AV components etc. Use this port to connect to a LAN port on a router Before connecting the power cord, connect all of your speakers and AV components. To display the setup so the AV receiver can be connected to your menu on the TV screen, connecting the TV to HDMI OUT MAIN is required.
  • Page 20: About Rihd

    The default of the assignment for the input selector buttons and jacks are as shown below. These settings can Players/Recorders be changed. (The assignment for the composite video jacks, analog audio jacks, DIGITAL AUX INPUT jack and • Onkyo and Integra -compatible players HDMI AUX INPUT jack cannot be changed.) •...
  • Page 21: Connection Tips

    Connections Operations that can be performed with Confirm the settings • On the TV, when you select anything other than the HDMI jack to which the AV receiver is connected, the input on the connection 1. Turn on the power for all connected components. AV receiver will be switched to “TV/CD”.
  • Page 22 Connections Video input signals flow through the AV receiver as This is possible when “Audio Return Channel” is set to Signal Selection Example “Auto” (➔ page 79), the TV/CD input selector is shown, with composite video, PC IN (Analog RGB), Blu-ray Disc/DVD player, etc.
  • Page 23: Connecting The Antennas

    Connections ■ Composite video Connecting the Antennas Composite video is commonly used on TVs, DVDs, and other video equipment. This section explains how to connect the supplied indoor FM antenna and AM loop antenna. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the Yellow antenna to use the tuner.
  • Page 24: Connecting Onkyo Ri Components

    • Some components may not support all functions. Refer (➔ page 88). to the manuals supplied with your Onkyo components. • While Zone 2/3 is on, the System On/Auto Power On and Direct Change functions do not work. En-24...
  • Page 25: Turning On & Basic Operations

    Turning On & Basic Operations the same circuit. If this is a problem, plug the AV receiver Turning Off into a different branch circuit. • Do not use a power cord other than the one supplied with Press ON/STANDBY on the front panel. the AV receiver.
  • Page 26: Firmware Update Notification

    Turning On & Basic Operations Initial Setup Firmware Update Notification Use / on the AV receiver or remote controller to select one of the following When a new version of the firmware is available, the This section explains the settings that we recommend options, and then press ENTER.
  • Page 27: Source Connection

    Turning On & Basic Operations Follow the instructions on screen to perform Source Connection Remote Mode Setup the network checking. This step checks the connection of source With this step, you can enter remote control codes for The checking is complete when the message components.
  • Page 28: Using The Automatic Speaker Setup

    Turning On & Basic Operations Measurement procedure Using the Automatic Speaker Setup Note • Make the room as quiet as possible. Background noise and To create a listening environment in your home With the supplied calibrated microphone, Radio Frequency Interference (RFI) can disrupt the room theater that all listeners will enjoy, Audyssey MultEQ ®...
  • Page 29 Turning On & Basic Operations Turn on the AV receiver and the connected TV. If “Speakers Type(Front)” is set to “Digital Place the speaker setup microphone at the Crossover”, a confirmation screen appears. next position, and then press ENTER. On the TV, select the input to which the AV Select “Next”...
  • Page 30 Speaker Setup again. Note that if the volume is set again. If this message appears after 2 or 3 too high and the sound distorts, detection issues may attempts, contact your Onkyo dealer. occur, so use an appropriate volume level. If the • Speaker Detect Error subwoofer has a low-pass filter switch, set it to Off or This message appears if a speaker is not detected.
  • Page 31: Performing Wireless Lan Setup

    Turning On & Basic Operations ■ PIN code method Performing Wireless LAN Setup Use / to select “Network Connection”, and to select “Wireless”, and then press 1. Use / to select “PIN Code” and then press ENTER (➔ page 80). ENTER.
  • Page 32 Turning On & Basic Operations Manual wireless LAN setup Select “OK” and press ENTER. Use / to select the Access Point you wish to Connection to your Access Point starts and Wi-Fi connect to, and then press ENTER. indicator flashes. After the connection to your Depending on your encryption settings, the Press RECEIVER followed by HOME.
  • Page 33: Playback

    (➔ page Press the input selector button to which the AV components to be played is connected. • “Using the Onkyo Dock” (➔ page Press the TV/CD button to play the audio of the TV. Switching the input on the TV is also required.
  • Page 34: Controlling Contents Of Usb Or Network Devices

    Playback TOP MENU REPEAT Controlling Contents of USB or This button displays the top menu for each media or Press this button repeatedly to cycle through the repeat Network Devices service. modes. (➔ page / and ENTER These buttons navigate through the menus. •...
  • Page 35: Understanding Icons On The Display

    Playback Pairing the AV receiver with a Bluetooth- Understanding Icons on the Display Playing an Audio from Bluetooth- enabled device enabled Device This section describes icons that appear on the AV Pairing is an operation where Bluetooth-enabled receiver’s display during media playback. About the Bluetooth Wireless Technology devices register with each other beforehand.
  • Page 36: Playing A Usb Device

    • The model name appeared on the display of your • The on-screen information appears only on a TV that is Bluetooth-enabled device is “Onkyo TX-NR929”. choice. TuneIn is preprogrammed on the AV receiver. connected to HDMI outputs.
  • Page 37 Playback Setting an TuneIn account • Adding TuneIn radio stations or programs to My Use / to select a station or a program, and Presets then press ENTER. To create a user account for TuneIn, open a browser Select “TuneIn”, and press ENTER button to display Playback starts.
  • Page 38: Registering Other Internet Radio

    Playback Click “Save” to save the Internet radio station. Registering Other Internet Radio Changing the Icon Layout on the The Internet radio station is then added to “My Network Service Screen You need to connect the AV receiver to your home Favorites”.
  • Page 39 Playback Windows Media Player Setup On the “Stream” menu, select “Turn on media Use / / / to select “DLNA”, and press streaming”. ENTER. ■ Windows Media Player 11 Setup A dialog box appears. Use / to select a server, and then press This section explains how to configure Windows ENTER.
  • Page 40: Playing Music Files On A Shared Folder

    Playback ■ Creating a shared folder Playing music files on a shared folder Playing Music Files on a Shared Folder In order to enjoy Home Media, you must first create a Right-click the folder that you want to share. This section explains how to play music files on a shared folder on your computer.
  • Page 41: Remote Playback

    Playback Click “OK” to close the dialog box. Adjusting the Volume. Remote Playback This completes the Windows Media Player 12 You can adjust the volume by adjusting the You need to connect the AV receiver to your home configuration. volume bar in the “Remote playback” window. network (➔...
  • Page 42: Listening To Am/Fm Radio

    Playback ■ Tuning into stations by frequency Listening to AM/FM Radio Press TUNING / . You can tune into AM and FM stations directly by Searching stops when a station is found. entering the appropriate frequency. This section describes the procedure of using the buttons on the front panel, unless otherwise specified.
  • Page 43 Playback ■ ■ What is RDS? Displaying Radio Text (RT) Press MEMORY again to store the station or RDS stands for Radio Data System and is a method channel. Press RT/PTY/TP once. of transmitting data in FM radio signals. It was The station or channel is stored and the preset The RT information scrolls across the AV developed by the European Broadcasting Union...
  • Page 44: Playing Audio And Video From Separate Sources

    Playback ■ Listening to Traffic News (TP) RDS program types (PTY) Playing Audio and Video from Separate Type Display Sources You can search for stations that broadcast traffic None None news. You can listen to the audio of one input source while News reports News watching the video of another.
  • Page 45: Using The Listening Modes

    Playback Using the Listening Modes Note • The Dolby Digital and DTS listening modes can only be About Listening Modes selected if your Blu-ray Disc/DVD player is connected to the AV receiver with a digital audio connection (coaxial, optical, The AV receiver’s listening modes can transform your or HDMI).
  • Page 46 (➔ pages 17, 65). This is 5.1-channel surround sound. This surround system has five main ■ Onkyo-Original DSP Listening Modes channels of sound and a sixth subwoofer channel (called the point-one channel). Listening Mode Description...
  • Page 47 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout All Ch Stereo Ideal for background music, this mode Stereo Sound is output from the front left and fills the entire listening area with stereo right speakers and subwoofer.
  • Page 48 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout DTS-HD Master In this mode, audio from the input source If you’re not using any surround back M o v i e Audio is output without surround-sound speakers, Dolby Pro Logic II will be processing.
  • Page 49 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout DTS Neo:X This mode expands various sources and • Dolby Pro Logic II/IIx Movie + M o v i e D S X various inputs up to 11.1 channel. Audyssey DSX DTS Neo:X provides semi-spherical •...
  • Page 50 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout • THX Cinema • Dolby Pro Logic IIz Height + THX T H X C i n e m a THX Cinema mode corrects theatrical Cinema soundtracks for playback in a home •...
  • Page 51 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout • THX Select2 Games • THX Surround EX T H X S u r r For the replay of stereo and This mode expands 5.1-channel multichannel game audio, the THX sources for 6.1/7.1- channel playback.
  • Page 52 Playback Dialogue Normalization spatial errors that occur. On this product, when the be sure to go to the THX Audio Setup screen and THX indicator is on, THX features are automatically choose the setting that closely corresponds to the Dialogue Normalization (DialogNorm) is a feature of added in Cinema modes (e.g.
  • Page 53: Displaying Source Information

    Playback Displaying Source Information Using the Sleep Timer Setting the Display Brightness You can display various information about the current With the sleep timer, you can set the AV receiver to You can adjust the brightness of the AV receiver’s input source as follows.
  • Page 54: Changing The Input Display

    You can set which speakers you want to use by The Whole House Mode is useful when you want to When you connect an -capable Onkyo priority. add extra background music to your home party; this component, you must configure the input display so...
  • Page 55: Using Easy Macros

    First, the TV, the cable set-top box, and the AV receiver are turned on. Then the input selector is set Examples: to “CBL/SAT”. If you wished to use MY MUSIC to start the Onkyo ■ MY MUSIC CD player, you would press and hold down...
  • Page 56: Using The Home Menu

    Playback you can easily switch between inputs as their a short while after the AV receiver is turned on. Using the Home Menu previews are displayed on a single screen. Please wait until it becomes operable. Press ENTER to display the main preview Press ENTER to display the network service The Home menu provides quick access to frequently (currently selected HDMI input) and the...
  • Page 57: Advanced Operations

    Advanced Operations ■ Input Using the Quick Setup You can select input sources and view the following information: the name of input selectors, input assignments, the name of the device paired with the AV receiver via Bluetooth, radio Advanced Operations information, and ARC function setting.
  • Page 58: Using The Audio Settings Of Quick Setup

    Advanced Operations Tone Control Using the Audio Settings of Quick Note “BLUETOOTH” cannot be selected, if you’ve selected Setup ■ Bass NET or USB as input selector in Multi Zone. –10dB to 0dB to +10dB in 2 dB steps. You can change various audio settings from the When HDMI IN 1/2/3/AUX INPUT is displayed on the You can boost or cut low-frequency sounds main preview, HDMI IN 4 is also displayed on the...
  • Page 59 Advanced Operations Phase Matching Bass Speaker Levels – Any listening mode other than Direct or Pure Audio is selected. – A pair of headphones is not connected. ■ ■ Phase Matching Bass Subwoofer Level • The setting is stored individually for each input selector. –15.0dB to 0.0dB to +12.0dB in 0.5 dB steps.
  • Page 60 Advanced Operations • The Late Night function is set to “Off” when the AV receiver Re-EQ (Re-Equalization) Screen Centered Dialog is set to standby. For Dolby TrueHD sources, it will be set Movie soundtracks were designed for playback in By using the front high speaker, this function moves to “Auto”.
  • Page 61: Using The Setup Menu (Home)

    Advanced Operations Main menu item Sub menu item Using the Setup Menu (HOME) Setup Menu Items 5. Listening Mode Preset BD/DVD (➔ page CBL/SAT Main menu item Sub menu item STB/DVR 1. Input/Output Assign Monitor Out (➔ page GAME1 HDMI Input GAME2 Component Video Input RECEIVER...
  • Page 62: Input/Output Assign

    Advanced Operations Explanatory Notes 1. Input/Output Assign Note • The “HDMI Through” setting is only available for the HDMI 2. Speaker Setup Monitor Out OUT MAIN jack (➔ page 78). Operating on the AV receiver Speaker Configuration On the “Monitor Out” settings, you can select whether or not to have the video sources’...
  • Page 63 Advanced Operations ■ ■ Resolution HDMI Input BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2, PC, TV/CD, PHONO Through: If you connect a video component to an HDMI input, Select this to pass video through the AV receiver HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, HDMI6, you must assign that input to an input selector.
  • Page 64: Speaker Setup

    Advanced Operations Component Video Input Digital Audio Input 2. Speaker Setup If you connect a video component to a component If you connect a component to a digital audio input, Here you can check the settings made by video input, you must assign that input to an input you must assign that input to an input selector.
  • Page 65 Advanced Operations ■ ■ Speaker Impedance Subwoofer Note 4ohms: • Powered Zone 3 is not available in the following cases: Select if the impedance of any speaker is – The “Speakers Type(Front)” setting is set to “Bi-Amp” or 4 ohms or more but less than 6. “Digital Crossover”.
  • Page 66 Advanced Operations This setting cannot be selected if the “Speakers Type meters: Note (Front)” setting is set to “Bi-Amp” or “Digital Distances can be set in meters. Range: 0.15m • If the “Subwoofer” setting is set to “No”, this setting cannot Crossover”.
  • Page 67 Advanced Operations – The “Powered Zone 3” setting is set to “Yes” Use / to select a frequency, and then use Note (➔ page 65) while Powered Zone 2 is enabled to adjust the level at that frequency. • These settings cannot be calibrated when the AV receiver (➔...
  • Page 68 Advanced Operations ■ ■ Preserve THX Settings physical offset between sound drivers. At a digital Overlap processing level, it corrects this offset by delaying the related audio signal. Although this function is meant for speakers without If this setting is set to “Yes”, Dynamic EQ and With this setting, a frequency band near the specified crossover network, it can also be used with bi-amped Dynamic Volume have no effect in THX listening...
  • Page 69: Audio Adjust

    Advanced Operations Dolby 3. Audio Adjust • Sounds processed by Digital Processing Crossover ■ With the Audio Adjust functions and settings, you can PL IIx Music (2ch Input) Network are played. adjust the sound and listening modes as you like. These settings apply to only 2-channel stereo •...
  • Page 70 Advanced Operations ■ ■ PL IIz Height Gain TrueHD Loudness Management Theater-Dimensional ■ Listening Angle Wide: High This setting specifies whether or not to apply the Late Night processing on a Dolby TrueHD source. Select if the listening angle is greater than 30 The Height Gain Control in Dolby Pro Logic IIz degrees.
  • Page 71: Source Setup

    Advanced Operations ■ DTS and DTS-HD High Resolution sources Equalizer 4. Source Setup DSD (Super Audio CD) sources Manual: Items can be set individually for each input selector. Sound Program Edit The manual setting in “Equalizer Settings” Press the input selector buttons to select an input (➔...
  • Page 72 Advanced Operations ■ Dynamic EQ will play at reference level when the master volume About Audyssey Dynamic EQ ® control is set to the 0 dB position. At that level you Audyssey Dynamic EQ solves the problem of can hear the mix as the mixers heard it. deteriorating sound quality as volume is decreased by Audyssey Dynamic EQ is referenced to the standard taking into account human perception and room...
  • Page 73 Advanced Operations IntelliVolume – “HDMI CEC (RIHD)” is set to “On” (➔ page 78) and Name input area you’re listening through your TV speakers. • A/V Sync is disabled when the Pure Audio or Direct ■ IntelliVolume 4 - 4. Name Edit BD/DVD listening mode is used with an analog input source.
  • Page 74 Select the desired level. these standards to obtain optimal picture quality from According to the input signals and monitor the receiver. Accordingly, Onkyo recommends that output setting, the AV receiver automatically setup and calibration be performed by an ISF selects the aspect ratio.
  • Page 75 Advanced Operations ■ ■ ■ Resolution Saturation Blue Brightness *2*4*7 *1*2*4 *2*4 Through: –50 to 0 to +50 –50 to 0 to +50 Select this to pass video through the AV receiver With this setting, you can adjust saturation. “–50” is With this setting you can adjust the brightness of blue at the same resolution and with no conversion.
  • Page 76: Listening Mode Preset

    Advanced Operations Audio Selector You can select “ARC” if you select the TV/CD input 5. Listening Mode Preset selector. But you cannot if you’ve selected “Off” in the “Audio Return Channel” setting (➔ page 79). ■ Audio Selector You can assign a default listening mode to each input source that will be selected automatically when you ARC: Setting the Incoming Digital Signal (Fixed...
  • Page 77: Miscellaneous

    Advanced Operations ■ Headphone Level • For the “BLUETOOTH” input selector, only “Digital” is 6. Miscellaneous –12dB to 0dB to +12dB available. With this setting, you can specify the headphone Volume Setup ■ Analog/PCM/Digital volume relative to the main volume. This is useful if With this setting, you can specify the listening mode there’s a volume difference between your speakers ■...
  • Page 78: Hardware Setup

    Advanced Operations ■ HDMI Through 7. Hardware Setup Note • When the setting is set to “On” and the menu is closed, the BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2, Tuner names of connected -compatible components and PC, AUX, TV/CD, PHONO: “RIHD On” are displayed on the AV receiver. “Search…”...
  • Page 79 Advanced Operations ■ ■ Audio TV Out (Main) Audio TV Out (Sub) HDMI OUT SUB) the audio is output from the speakers connected to the AV receiver. ■ Audio Return Channel This preference determines whether the incoming This preference determines whether the incoming audio signal is output from HDMI OUT MAIN.
  • Page 80 Advanced Operations ■ InstaPrevue Network Note These settings apply to “InstaPrevue” of the Home On” • Set to “ , the Auto Standby function may activate itself This section explains how to configure the AV menu and specify the preview display of (➔...
  • Page 81 Advanced Operations ■ ■ MAC Address Proxy Port This is the AV receiver’s MAC (Media Access If you’re using a Web proxy, enter a proxy port • If pairing setting is not set, “Ready” appears on-screen Control) address. This address cannot be changed. number here.
  • Page 82: Remote Controller Setup

    ■ Setup 1, 2, or 3 Locked When several Onkyo components are used in the Unlocked same room, their remote ID codes may overlap. To When “Locked” is selected, the setup menus will be differentiate the AV receiver from other components, locked and you cannot change any setting.
  • Page 83: Multi Zone

    Advanced Operations Multi Zone In addition to the main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And, you can select a different source for each room. Making Multi Zone Connections Connecting Your Zone Speakers Directly to the AV receiver Connecting the Zone Speakers to an Additional Amplifier This setup allows you to select different sources for Main room and Zone 2/3.
  • Page 84: Controlling Multi Zone Components

    Advanced Operations 12V Trigger Out To turn on Zone 2/3 and select an input source, Note press ZONE 2 or ZONE 3 followed by an input • If you use HDMI OUT ZONE 2, make sure to set “Zone 2 When Zone 2/3 is turned on, the output from the 12V selector button within 8 seconds.
  • Page 85 Advanced Operations Muting Zones • The component connected to HDMI input other than HDMI Press ZONE repeatedly, then point the remote IN 1/2/3/AUX INPUT is selected as an input source for controller at the AV receiver and press ■ Zone 2, the linked operations of may not work Operating on the remote controller RECEIVER.
  • Page 86: Using The Remote Controller In Zone And Multiroom Control Kits

    Advanced Operations Using a Multiroom Kit with Other Using the Remote Controller in From the connecting block Components Zone and Multiroom Control Kits Miniplug cable In this setup, an IR emitter is connected to the AV To control the AV receiver with the remote controller receiver’s IR OUT jack and placed in front of the other while you’re in Zone, you’ll need a commercially component’s remote control sensor.
  • Page 87: Controlling Other Components

    • Remote control codes cannot be entered for to select “Not Listed”, and then press RECEIVER and the multi zone button. BD/DVD Onkyo Blu-ray Disc player (➔ page ENTER. • Only TV remote control codes can be entered for TV.
  • Page 88: Remapping Colored Buttons

    Controlling Onkyo components without Note If you want to control an Onkyo component by • The learning command is also reset. pointing the remote controller directly at it, or you • To reset the REMOTE MODE buttons to their default want to control an Onkyo component that’s not...
  • Page 89: Resetting The Remote Controller

    Controlling Other Components Controlling Apple TV Controlling a Blu-ray Disc/DVD Player, HD Resetting the Remote Controller DVD Player or DVD Recorder By programming the supplied remote controller with You can reset the remote controller to its default the appropriate remote control code, you can use it to BD/DVD is preprogrammed with the remote control settings.
  • Page 90 Controlling Other Components ■ ■ TV operation DVD player/DVD recorder operation Press the appropriate REMOTE Available buttons Available buttons MODE button first. Number: 1 to 9, 0 TOP MENU DISPLAY , INPUT, TV VOL / GUIDE / / / , ENTER SOURCE Number: +10 DISPLAY...
  • Page 91 Controlling Other Components ■ Satellite receiver/Cable receiver operation Press the appropriate REMOTE Available buttons MODE button first. GUIDE Number: 1 to 9, 0 Number: +10 / / / , ENTER SETUP DISPLAY SOURCE MUTING CH +/– A (Red) B (Green) PREV CH C (Yellow) RETURN...
  • Page 92: Using The Onkyo Dock

    AV receiver will RI Dock For the latest information on the Onkyo Dock automatically switch to the input to which the RI Dock components, see the Onkyo web site at: With the RI Dock, you can easily play the music of is connected.
  • Page 93: Controlling Your Ipod/Iphone

    ). In this case, make an DISPLAY turns on the backlight for a few seconds. connection and enter the remote control code 81993 This button does not turn the Onkyo DS-A2 or DS-A2X (with RI Dock on or off. Also, your iPod/iPhone may not respond the first time you press this button, in which case ■...
  • Page 94: Learning Commands

    (about 3 seconds). • Remote controller buttons such as Play, Stop, and Pause are preprogrammed with commands for controlling Onkyo On the supplied remote controller, press the CD players, cassette decks, and DVD players. However,...
  • Page 95: Using Normal Macros

    Controlling Other Components When you’ve finished, press ACTIVITIES Using Normal Macros again. You can program the remote controller’s ACTIVITIES ACTIVITIES button flashes twice. to perform a sequence of remote control actions. If you enter 32 commands, the process will Example: finish automatically.
  • Page 96: Appendix

    Make sure that the polarity of the speaker cables is correct, AV receiver before contacting your Onkyo dealer. and that the bare wires are in contact with the metal part of ■...
  • Page 97 Appendix ■ ■ The front high, front wide and surround back The speaker volume cannot be set as required If the input signal format is set to “PCM” or “DTS”. Set it to speakers produce no sound “Off”. (➔ page Check to see if a maximum volume has been set.
  • Page 98 Can’t control other components your TV must be connected to the HDMI output(s) or the ■ Reception is noisy, FM stereo reception is noisy, If it’s an Onkyo component, make sure that the cable corresponding composite video output. (➔ page and analog audio cable are connected properly.
  • Page 99 Appendix To control an Onkyo component that’s not connected via Make sure you’ve selected the right remote mode. Cannot receive radio wave due to a bad connection. (➔ page Shorten the distance from wireless LAN access point or , point the remote controller at the component. Be sure remove obstacles for a good visibility, and try again.
  • Page 100 Appendix ■ Cannot connect with the AV receiver If the server is serving large music files to several If an MHL-enabled mobile device connected to the AUX The Bluetooth-enabled device does not support the profiles networked devices simultaneously, the network may (front) input is charged, the power consumption in standby required for the AV receiver.
  • Page 101 Appendix ■ The following settings can be made for the • We assume no responsibility whatsoever for any Radio Wave Caution composite video inputs error or damage of network environment or access device resulting from the use of this apparatus. You must use the buttons on the unit to make these The AV receiver uses a 2.4 GHz radio wave Confirm with the provider or access device maker...
  • Page 102 LAN device. • We assume no responsibility whatsoever for any Onkyo is not responsible for damages (such as CD damages resulting from the use of this apparatus rental fees) due to unsuccessful recordings caused except in the cases deemed acceptable under the by the unit’s malfunction.
  • Page 103 Appendix DISCLAIMER Video Resolution Chart Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this The following tables show how video signals at different resolutions are output by device, and its affiliates (collectively, “Company”).
  • Page 104: Firmware Update

    (➔ page 78). choose from the following two methods: update via own risk. Onkyo will not be liable and you will have • Turn off the controller device connected via RS232 network, or update via USB storage. Choose the one no remedy for damages for any claim of any kind and network.
  • Page 105 Onkyo Support. Errors during an update via network Congratulations! You now have the latest Error Code Description firmware installed on your Onkyo AV receiver. Updating the Firmware via USB -01, The Ethernet cable was not detected. Reconnect the cable properly.
  • Page 106 (Alpha-numeric characters on the program. When this occurs, you can still view the front display are denoted by asterisks.) Refer to the Download the firmware file from the Onkyo update progress on the AV receiver’s display. following table and take appropriate action.
  • Page 107: About Hdmi

    Appendix About HDMI Supported Audio Formats About Copyright Protection • 2-channel linear PCM (32–192 kHz, 16/20/24 bit) The AV receiver supports HDCP (High-bandwidth Designed to meet the increased demands of digital Digital Content Protection) , a copy-protection TV, HDMI (High Definition Multimedia Interface) is a •...
  • Page 108: Network/Usb Features

    ■ • Onkyo accepts no responsibility whatsoever for the loss or Internet Access (for Internet radio) ■ damage to data stored on a USB device when that device...
  • Page 109 Appendix • Operation is not guaranteed for all USB devices, which 48 kHz, bitrates of between 5 kbps and 320 kbps, 500 kbps are supported. Incompatible files cannot includes the ability to power them. and WMA DRM are supported. be played. •...
  • Page 110: License And Trademark Information

    U.S. and other countries. are trademarks of Dolby Laboratories. Apple TV is a trademark of Apple Inc., registered in the Music Optimizer™ and “WRAT” are trademarks of Onkyo U.S. and other countries. Corporation. “MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL LLC in the United States and other counties.”...
  • Page 111 Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license. Other trademarks and trade names are those of their respective owners. Onkyo does not guarantee Bluetooth compatibility between the AV receiver and all Bluetooth-enabled devices.
  • Page 112: Specifications

    Appendix Specifications Video Section Compatible Bluetooth profiles A2DP 1.2 (Advanced Audio Distribution Profile) Input Sensitivity/Output Level and Impedance Amplifier Section AVRCP 1.3 (Audio Video Remote 1 Vp-p/75 Ω (Component Y) Control Profile) 0.7 Vp-p/75 Ω (Component P Supported Codecs Rated Output Power 1 Vp-p/75 Ω...
  • Page 113 Appendix ■ Video Inputs Component IN 1, IN 2 Composite BD/DVD, CBL/SAT, STB/DVR, GAME 1, Analog RGB PC IN ■ Video Outputs Component MONITOR OUT Composite MONITOR OUT ■ Audio Inputs Digital Optical: 2 (Rear), 1 (Front) Coaxial: 3 Analog BD/DVD, CBL/SAT, STB/DVR, GAME 1, PC, TV/CD, PHONO, AUX ■...
  • Page 114 Appendix Memo En-114...
  • Page 115 Appendix Memo En-115...
  • Page 116 Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.cn.onkyo.com/ Asia, Oceania, Middle East, Africa Please contact an Onkyo distributor referring to Onkyo SUPPORT site. http://www.intl.onkyo.com/support/ The above-mentioned information is subject to change without prior notice. Visit the Onkyo web site for the latest update.
  • Page 117 Using Internet Radio Using Internet Radio Using Multiple Accounts Pandora ® internet radio The AV receiver supports multiple user accounts, –Getting Started (U.S. only)..... 2 which means you can freely switch between several Common Procedures in Internet Radio logins. After registering user accounts, login is Menu performed from the “Users”...
  • Page 118 Pandora uses to create your personal radio After you have created your account and stations stations. you can return to your Onkyo receiver and press I’m tired of this track: PANDORA, the PANDORA logo, and the Pandora enter to begin listening to your personalized...
  • Page 119 Music Guide: remote control. account at You can play tracks from Genres, Top Artists, Enabled buttons: www.rhapsody.com/onkyo Top Albums, Top Tracks, New Releases, and , RANDOM, REPEAT If you have an existing Rhapsody account, select Staff Picks. Note “Sign in to your account”...
  • Page 120 If you have an existing SIRIUS account, you can The playback screen for the selected channel Your Onkyo AV receiver includes a free trial of sign in by selecting “Sign In”. Enter your user appears and you can listen to SiriusXM Internet SiriusXM Internet Radio.
  • Page 121 “Sign in to your Account Info: Your new Onkyo AV receiver is very clever. If you account”. Enter your user name and password in Confirm your account information. have a free Last.fm account, it will keep track of all the next keyboard screen.
  • Page 122 Using Internet Radio You can control the tracks with the buttons on Using Slacker Personal Radio the remote control. If you do not have an account, create one on Enabled buttons: the Slacker website (www.slacker.com) with ■ Menu Items your computer. Rate Song as Favorite: If you already have a Slacker account, select Stores information to server, making it more likely...
  • Page 123 Using Internet Radio Playing Contents on the AV Receiver The track at the top of the music list is automatically Using MP3tunes played back. Listen to your music collection on your home stereo in Use / to select a track and press ENTER or complete digital fidelity without a personal computer •...
  • Page 124 Utilisation d’une webradio Utilisation d’une Utilisation de plusieurs comptes Pandora ® internet Radio L’ampli-tuner AV prend en charge plusieurs comptes –Pour commencer webradio utilisateur, ce qui signifie que vous pouvez librement (États-Unis uniquement)......2 commuter entre plusieurs connexions. Après avoir enregistré...
  • Page 125 « au repos » et Pandora ne la lira compte et de vos stations, vous pouvez retourner plus pendant un mois. à votre récepteur Onkyo et appuyez sur entrée Create station from this artist : PANDORA, le logo PANDORA, et l’habillage pour écouter votre webradio Pandora...
  • Page 126 à partir de , RANDOM, REPEAT albums, des meilleures pistes, des nouveautés et www.rhapsody.com/onkyo Remarque des sélections du personnel. Si vous possédez déjà un compte Rhapsody, • Sur les canaux Rhapsody, certaines touches ne Rhapsody Channels : sélectionnez «...
  • Page 127 L’écran de lecture du canal sélectionné s’affiche pouvez y accéder en sélectionnant « Sign In ». et vous pouvez écouter SiriusXM Internet Radio. Votre ampli-tuner AV Onkyo comprend un essai Saisissez votre nom utilisateur et votre mot de gratuit de SiriusXM Internet Radio. L’écran « Account Vous pouvez contrôlez les pistes avec les...
  • Page 128 « Neighbours ». pouvez vous y connecter pour sélectionner Votre nouvel ampli-tuner AV Onkyo est très intelligent. « Sign in to your account ». Saisissez votre Account Info : Si vous avez un compte Last.fm gratuit, il garde une nom utilisateur et votre mot de passe dans Vérifiez les informations de votre compte.
  • Page 129 Utilisation d’une webradio Vous pouvez contrôlez les pistes avec les Utilisation de Slacker Personal Radio touches sur la télécommande. Si vous ne possédez pas de compte, créez-en Boutons activés : un à partir du site Web de Slacker ■ Eléments du menu (www.slacker.com) à...
  • Page 130 Uso de Internet Radio Uso de Internet Radio Uso de múltiples cuentas Pandora ® Internet Radio El receptor de AV permite múltiples cuentas de –Primeros pasos (solo EE.UU.)....2 usuario, lo que quiere decir que se puede cambiar Procedimientos comunes en el menú libremente entre varios usuarios.
  • Page 131 Una vez creada su cuenta y sus I’m tired of this track: PANDORA, el logotipo de PANDORA logo, y la emisoras, puede regresar al receptor Onkyo y Si se cansa de un tema, puede “silenciarlo” de imagen corporativa de Pandora son marcas...
  • Page 132 Para utilizar Rhapsody, necesitará una cuenta. Si todavía no tiene una, puede crear una nueva en Music Guide: Puede controlar las pistas con los botones del www.rhapsody.com/onkyo mando a distancia. Puede reproducir canciones por géneros, artistas Si ya tiene una cuenta Rhapsody, seleccione principales, álbumes principales o canciones...
  • Page 133 Aparecerá la pantalla de reproducción de la seleccionando “Sign In”. Escriba su nombre de emisora seleccionada y ahora usted podrá Su receptor de AV Onkyo incluye una prueba gratuita usuario y contraseña en la pantalla de teclado escuchar SiriusXM Internet Radio.
  • Page 134 “Uso de múltiples cuentas” (➔ página 1). Se Ban this track: Radio sin anuncios en su receptor de AV Onkyo sin puede iniciar sesión desde la pantalla “Users”. Se guarda la información sobre la canción en el necesidad de un ordenador.
  • Page 135 Uso de Internet Radio Puede controlar las pistas con los botones del Uso de Slacker Personal Radio mando a distancia. Si no tiene una cuenta, cree una en el sitio web Botones activados: de Slacker (www.slacker.com) con su ■ Elementos del menú ordenador.
  • Page 136 Y1212-1 SN 29401478IRUS * 2 9 4 0 1 4 7 8 I R U S *...
  • Page 137 Using Internet Radio Using Internet Radio Using Multiple Accounts The AV receiver supports multiple user accounts, Using Last.fm Internet Radio ......2 which means you can freely switch between several Common Procedures in Internet Radio logins. After registering user accounts, login is Menu performed from the “Users”...
  • Page 138 “Sign in to your Account Info: Your new Onkyo AV receiver is very clever. If you account”. Enter your user name and password in Confirm your account information. have a free Last.fm account, it will keep track of all the next keyboard screen.
  • Page 139 Internetradio verwenden Internetradio verwenden Verwendung mehrerer Konten Der AV-Receiver unterstützt mehrere Nutzerkonten, Verwendung von Last.fm Internet Radio ..2 was bedeutet, dass Sie frei zwischen mehreren Allgemeine Verfahren bei den Logins umschalten können. Nach der Anmeldung der Nutzerkonten wird das Login vom „Users“ Bildschirm Internetradio-Menüs aus vorgenommen.
  • Page 140 Verwenden Sie / , um „Sign in to your Lieblingsmusik merkt... Library“, „Your Neighbourhood“ und „Your account“ auszuwählen und dann drücken Sie Recommendations“). Ihr neuer Onkyo AV-Receiver ist äußerst clever. Wenn Sie ENTER. ein kostenloses Last.fm-Konto eingerichtet haben, werden Profile: Wenn Sie über einen bestehenden Last.fm Konto darin alle kürzlich abgespielten Titel gespeichert.
  • Page 141 Remote Control Codes Remote Control Codes While holding down the REMOTE MODE button to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds). The REMOTE MODE button/Remote indicator lights. On Integra products, button names are capitalized. For example, “Remote Mode” button and “Display”...
  • Page 142 Remote Control Codes Codes de télécommande Códigos de control remoto Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez Manteniendo pulsado el botón REMOTE MODE para el cual desea introducir un associer un code, pressez et maintenez enfoncé le bouton [DISPLAY] (pendant código, pulse y mantenga presionado el botón [DISPLAY] (aproximadamente 3 environ 3 secondes).
  • Page 143 Remote Control Codes Codici del telecomando Fernbedienungscodes Tenendo premuto il tasto REMOTE MODE al quale si desidera assegnare il Halten Sie die REMOTE MODE-Taste gedruckt, fur die Sie den Code eingeben codice, premere e tenere premuto [DISPLAY] (per circa 3 secondi). mochten, und drucken Sie (ca.
  • Page 144 Remote Control Codes Afstandsbedieningscodes Fjärrstyrningskoder Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code Håll ned knappen för det REMOTE MODE som du vill tilldela en kod samtidigt wilt toewijzen de [DISPLAY] toets ingedrukt (ongeveer 3 seconden). som du trycker och håller ned [DISPLAY] (i cirka 3 sekunder).
  • Page 145 Remote Control Codes 遥控代码 按住想指定编码的 REMOTE MODE (遥控模式)按钮的同时,按住 [DISPLAY (显示)] (大约 3 秒钟) 。 REMOTE MODE (遥控模式)按钮 / 遥控指示灯亮起。 Integra 产品上的按钮名称单词首字母大写。例如, “Remote Mode (遥控模 式) ”按钮和 “Display (显示) ”按钮。 注意: • [RECEIVER (接收机)] 和多区域按钮不能输入遥控编码。 • • 只能为 [TV (电视)] 输入电视遥控编码。 •...
  • Page 146 Remote Control Codes Dedicated Onkyo Receiver Cable Set Top Box Cable Set Top Box Cable/PVR Combination Default 62503 mio TV 02802 Toshiba 01509 Samsung 01877 Zone 2 62506 Motorola 01376, 00858, 01562, 01582 Scientific Atlanta 01877, 01982 01982, 01998, 02378...
  • Page 147 Aiwa 70157 Marantz 40029 Memorex 70032 Technics 70029, 70303 Arcam 70157 Myryad 40029 Meridian 70157 Thorens 70157 Atoll Electronique 70157 Onkyo 42157 Micromega 70157 Thule Audio 70157 Audio Research 70157 Optimus 40027 Miro 70000 Traxdata 70626 Audiolab 70157 Philips 40029...
  • Page 148 01251, 01334, 01626 Boston 01251 DigiQuest 01300, 01457, 01631 00775 Receiver Boxer 01458 Digisky 01457 Gold Box 00853 Onkyo 52503 British Sky 00847, 01175, 01662 DigitalBox 01100, 01631 Gold Vision 01631 Broadcasting Digiwave 01631 GoldMaster 01334 Satellite Set Top Box...
  • Page 149 Remote Control Codes Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Hama 01567 Leiko 01626 Pace 00847, 00853, 00887, Sat Industrie 01611 01175, 01323, 01356, Hanseatic 01100 Lemon 01334 SAT+ 01409 01423, 01662, 01693, Hirschmann 00173 Lenoxx...
  • Page 150 Remote Control Codes Satellite Set Top Box Satellite Set Top Box SAT/PVR Combination SAT/PVR Combination Star 00887 00642 BskyB 01175, 01662 Schneider 01206 Stream System 01300 00879, 01356 Bush 01645 Sedea Electronique 01206 Strong 00853, 00879, 01284, United 01251, 01626, 02418 Canal Satellite 02657 01175, 01662, 01693,...
  • Page 151 Remote Control Codes Television Television Television Television Akai 10178, 10556, 10037, Basic Line 10556, 10037, 10668, Casio 10037 Dick Smith 10698 10714, 10715, 10208, 11037 Electronics Cathay 10037 11675 Baur 10037, 10195, 10512 Digatron 10037 10037 Akiba 10037 Beaumark 10178 Digihome 11667 Centrum...
  • Page 152 Remote Control Codes Television Television Television Television Erres 10037 Genesis 10037 Hisense 10556, 10508, 10208, 10037 11363, 12098 10171 Genexxa 10037 11709 Hitachi 10150, 10178, 10037, 10037 10171, 11864, 11886 Jinfeng 10208 10634, 11037, 10508, Euroman 10037 Godrej 11585 Jinxing 10556, 10037, 10698 10499, 10578, 11576, Europa...
  • Page 153 10037, 10714, 10668, Medion 10556, 10037, 10714, Naiko 10037 Onix 10698 11037, 12001 10668, 11037, 10698, Nakimura 10037 Onkyo 11807, 13100, 13500 10512, 11248, 11585, Linsar 11585 National 10508, 10208 11667, 11709 11667, 12001, 12719 Local India TV 10208 10178, 10653, 10508,...
  • Page 154 Remote Control Codes Television Television Television Television Phoenix 10037 Reflex 10037, 10668, 11037 Sei-Sinudyne 10037 SunBriteTV 11610 Phonola 10556, 10037 Relisys 11585 Serie Dorada 10178 Sungoo 11248 Pioneer 10037, 10698, 10512, Remotec 10171, 10037 Shanghai 10208 Sunny 10037 11457, 11636, 12171 Reoc 10714 Sharp...
  • Page 155 Remote Control Codes Television Television Television Technosonic 10556, 10625, 10499, Toyoda 11709 11365, 12098 Humax 20739 11324 TRANS-continents 10556, 10037, 10668, Walker 11667 Panasonic 20614, 20616 Techvision 11709 11037 Waltham 10037, 10668, 11037 Philips 20739 Techwood 11037, 11667 Transonic 10037, 10698, 10512, Wansa 12098 ReplayTV...
  • Page 156 Alba 30539, 30713 30741 Dynex 32596 30503, 30539, 30623, Ambiance 33052 30741, 31602 30867, 31597, 31602, Dyon 33052 Amstrad 30713 Onkyo 30503, 30627, 31612, 32855 eBench 31152 32147, 30571, 31634 Anthem 32820 Kendo 30713 Elfunk 30713 Oppo 30575, 32545 Aristona...
  • Page 157 32414, 32432, 33444 Vizio 32563 Pioneer 30631, 32860 Skantic 30539, 30713 Momitsu 33052 Vtrek 32587 30646 SM Electronic 31152 Onkyo 32147, 32900, 32910, Waltham 30713 30522 33100, 33101, 33500, Smart 30713 Wellington 30713 33501 Samsung 30490, 31635 Sony 30533, 30864, 31033,...
  • Page 158 HD-DVD Odys 12719 Integra 32901, 33104 33504 Panasonic 12170 30741 Philips 11454, 10556, 11394, 30539 Microsoft 32083 Powerpoint 10698 Onkyo 32901, 33104 33504 Prosonic 12001 Xbox 32083 Pvision 12001 TV/DVD Combination 12746, 12932 Akai 11675 Schaub Lorenz 12001 Black Diamond...
  • Page 159 Remote Control Codes Memo...
  • Page 160 Y1303-2 SN 29401094A * 2 9 4 0 1 0 9 4 A *...

Table of Contents

Save PDF