Hdmi Monitor Setup - Onkyo TX-NR905 Instruction Manual

First Time Setup—Continued
6
Use the Up and Down [
buttons to select "Front (Speaker
B)," and use the Left and Right
ENTER
[
NotUse: Select this if you're not using
Normal: Select this if you've con-
Bi-Amp:Select this if you've con-
BTL: Select this if you've con-
Note:
• Bi-Amp and BTL cannot be selected
if Front (Speaker A) is set to Bi-Amp
or BTL.
7 Press the [SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
52
]/[ ] buttons to select:
Speakers B.
nected your front Speakers B
normally.
nected your front Speakers B
for bi-amped operation.
nected your front Speakers B
for bridged operation. The
BTL indicator will appear on
the display.

HDMI Monitor Setup

]/[ ]
2, 3
1, 6
If you connect your TV to the COMPONENT VIDEO
OUT, set the HDMI Monitor setting to No so that the
onscreen setup menus are displayed and composite
video and S-Video sources are upconverted and output
by the COMPONENT VIDEO OUT.
If you connect your TV to the HDMI OUT MAIN or
HDMI OUT SUB, set the HDMI Monitor setting to
Main or Sub, respectively, so that the onscreen setup
menus are displayed and composite video, S-Video, and
component video sources are upconverted and output by
the HDMI OUT MAIN or HDMI OUT SUB.
You can specify the output resolution for the HDMI out-
puts and COMPONENT VIDEO OUT and have the AV
receiver upconvert the picture resolution as necessary to
match the resolution supported by your TV.
1
RECEIVER
ON STANDBY
TV
INPUT
DVD VCR/DVR CBL/SAT
+
1 2 3
TV CH
GAME/TV AUX 1 AUX 2
-
4 5 6
TAPE TUNER CD
7 8 9
PHONO NET/USB D. TUN TV VOL
+10
0 CLEAR
--/--- 10 11 12
INPUT SELECTOR
MACRO
1 2 3 ZONE 3
REMOTE MODE
DVD VCR CD 2
ZONE
CDR/MD/DOCK
NET/USB
TV CABLE RECEIVER
SAT TAPE/AMP
DIMMER SLEEP
+
CH
VOL
ENTER
DISC
ALBUM
-
PREV
CH
DISPLAY MUTING
REC RANDOM
PLAYLIST
SP A SP B
LISTENING MODE
STEREO SURR
REPEAT AUDIO SUBTITLE PLAY MODE
PURE A DIRECT THX ALL ST
Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
1
2–5