Monitor Out - Onkyo TX-NR905 Instruction Manual

Getting to Know the AV Receiver—Continued
G
SIRIUS antenna (on North American model)
This jack is for connecting a SIRIUS digital
antenna, sold separately (see the separate SIRIUS
instructions).
H
XM antenna (on North American model)
This jack is for connecting an XM Mini-Tuner and
Home Dock, sold separately (see the separate XM
instructions).
I

MONITOR OUT

The S-Video or composite video jack should be
connected to a video input on your TV or projector.
J
AM ANTENNA (not North American model)
These push terminals are for connecting an AM
antenna.
K
ZONE 2 OUT
This composite video output can be connected to a
video input on a TV in Zone 2.
L
FM ANTENNA (not North American model)
This jack is for connecting an FM antenna.
M
IR IN/OUT
A commercially available IR receiver can be con-
nected to the IR IN jack, allowing you to control the
AV receiver while you're in Zone 2, or control it
when it's out of sight, for example, installed in a
cabinet.
A commercially available IR emitter can be con-
nected to the IR OUT jack to pass IR (infrared)
remote control signals through to other components.
N
12V TRIGGER OUT ZONE 2
This output can be connected to the 12-volt trigger
input on a component in Zone 2. When Zone 2 is
turned on, a 12-volt trigger signal is output.
O
ETHERNET port
This port is for connecting the AV receiver to your
Ethernet network (e.g., router or switch) for playing
music files on a networked computer or media
server, or for listening to Internet radio.
P
AM and FM ANTENNA (HD Radio) (on North
American model)
The AM push terminals are for connecting an AM
antenna. The FM jack is for connecting an FM
antenna.
Q
AC INLET
The supplied power cord is connected here. The
other end of the power cord should be connected to
a suitable wall outlet.
R
DIGITAL COAXIAL IN 1, 2, and 3
These coaxial digital audio inputs are for connect-
ing components with a coaxial digital audio output,
such as a CD player or DVD player. They're assign-
able, which means you can assign each one to an
input selector to suit your setup. See "Digital Input
Setup" on page 58.
S
DIGITAL OPTICAL IN 1, 2, and OUT
These optical digital audio inputs are for connecting
components with an optical digital audio output,
such as a CD player or DVD player. They're assign-
able, which means you can assign each one to an
input selector to suit your setup. See "Digital Input
Setup" on page 58.
The optical digital audio output is for connecting a
digital recorder with an optical digital input, such as
a CD recorder.
T
GND screw
This screw is for connecting a turntable's ground
wire.
U
CD IN
This analog audio input is for connecting a CD
player's analog audio output.
V
TAPE IN/OUT
These analog audio input and output jacks are for
connecting a recorder with an analog audio input
and output, such as a cassette deck, MD recorder,
etc.
W
AUX 1 IN
A VCR for playback only or other video source can
be connected here. There's S-Video and composite
video input jacks for connecting the video signal.
X
GAME/TV IN
A game console or TV output can be connected
here. There's S-Video and composite video input
jacks for connecting the video signal.
Y
CBL/SAT IN
A cable or satellite receiver can be connected here.
There's S-Video and composite video input jacks
for connecting the video signal.
Z
VCR/DVR IN/OUT
A video component, such as a VCR or DVR, can be
connected here for recording and playback. There's
S-Video and composite video input and output jacks
for connecting the video signal.
a
DVD IN
This input is for connecting a DVD player. There's
S-Video and composite video input jacks for con-
necting the video signal.
b
FRONT L/R, CENTER, SURR L/R, and SURR
BACK L/R SPEAKERS
These terminal posts are for connecting the front
Speakers A, center, surround, and surround back
speakers.
The FRONT L/R and SURR BACK L/R terminal
posts can be used with front Speakers A and sur-
round back speakers, respectively, or used to bi-amp
or bridge front Speakers A. See "Bi-amping Front
Speakers A" and "Bridging Front Speakers A" on
page 28.
13