Onkyo TX-NR905 Instruction Manual page 97

Advanced Setup—Continued
Setting Speakers A and Speakers B
These settings are not set automatically by the Auto-
matic Speaker Setup function (see page 61).
If you're using Speakers B, you can choose whether or
not to use the subwoofer, center, surround, and surround
back speakers with the Speakers A and Speakers B con-
figurations independently. You cannot choose whether or
not to use the front speakers.
Use the remote controller's [SP A] or [SP B] button to
select Speakers A or Speakers B, respectively.
13 Press the Down [
display the bottom half of the
Speaker Config screen.
ENTER
2-2.Speaker Config
Subwoofer
Front
Center
Surround
Surr Back
Notes:
• The bottom half of the Speaker Con-
fig screen can only be displayed
when the Speakers Type Front B set-
ting is set to something other than
Not Use (page 51).
• You can switch between the Speak-
ers A and Speakers B settings on
either half of the Speaker Config
screen.
14 Use the Up and Down [
buttons to select "Subwoofer,"
and then use the Left and Right
ENTER [ ]/[ ] buttons to select:
Not Use: Select if you don't want to
use the subwoofer with
Speakers A or Speakers B.
Use: Select if you do want to use
the subwoofer with Speakers
ENTER
A or Speakers B.
Note:
• Cannot be set if Subwoofer (step 5) is
set to No.
] button to
Speakers A
Not Use
Use
Not Use
Use
Use
]/[ ]
15
Use the Up and Down [
buttons to select "Center," and
then use the Left and Right
ENTER [ ]/[ ] buttons to select:
Not Use: Select if you don't want to
use the center speaker with
Speakers A or Speakers B.
Use: Select if you do want to use
the center speaker with
ENTER
Speakers A or Speakers B.
Note:
• Cannot be set if the currently
selected speakers (Speakers A or
Speakers B) is set to BTL (page 51),
or Center (step 7) is set to None.
16 Use the Up and Down [
buttons to select "Surround," and
then use the Left and Right
ENTER [ ]/[ ] buttons to select:
Not Use: Select if you don't want to
use the surround speakers
with Speakers A or Speakers
B.
Use: Select if you do want to use
ENTER
the surround speakers with
Speakers A or Speakers B.
Note:
• Cannot be set if the currently
selected speakers (Speakers A or
Speakers B) is set to BTL (page 51),
or Surround (step 8) is set to None.
17
Use the Up and Down [
buttons to select "SurrBack," and
then use the Left and Right
ENTER [ ]/[ ] buttons to select:
Not Use: Select if you don't want to
use the surround back speak-
ers with Speakers A or Speak-
ers B.
Use: Select if you do want to use
ENTER
the surround back speakers
with Speakers A or Speakers
B.
Note:
• Fixed at Not Use if Surround (step
16) is set to Not Use.
• Cannot be set if Speaker Type Front
B is set to Bi-Amp or BTL (page 51),
SurrBack is set to None (step 9), or
Powered Zone 2 is being used
(page 121).
]/[ ]
]/[ ]
]/[ ]
97