Basic Setup—Continued
Specifying the TV System
(not American models)
This section explains how to specify the TV system used
in your area. (This setting is not available on the Ameri-
can model.)
1
Press the scroll wheel, and then
press the [SETUP] button.
The main menu appears onscreen.
2
Use the Up/Down [
tons to select "0. Hardware
Setup," and then press the
ENTER
[ENTER] button.
The Hardware Setup menu appears.
ENTER
3
Use the Up/Down [
tons to select "4. TV Format," and
then press the [ENTER] button.
ENTER
The TV Format menu appears.
0-4.TV Format
a.TV Format
ENTER
4
Use the Up/Down [
tons to select "a. TV Format," and
then use the Left/Right [
ENTER
buttons to select:
Auto: The TX-NR901 automati-
PAL: Select if the TV system in
NTSC: Select if the TV system in
5
Press the [SETUP] button.
The setup menu closes.
50
]/[
] but-
]/[
] but-
:Auto
Quit:[SETUP]
]/[
] but-
]/[
cally detects the TV system.
your area is PAL.
your area is NTSC.
Note:
• This procedure can also be performed by using the
TX-NR901's [SETUP] button, [
buttons, and [ENTER] button.
Changing the Input Source Display
for Use with a MiniDisc Recorder
If you connect an
recorder to the TX-NR901's TAPE IN/OUT sockets, so
that
functions such as Auto Power On/Off work
properly, you must change the input source display.
This setting can only be changed on the TX-NR901.
STANDBY/ON
STANDBY
POWER
ON
OFF
2
(
)
ZONE
GRN
REC (
RED
)
AUDIO
DVD
PURE AUDIO
UPSAMPLING
SELECTOR
1
Press the [TAPE] input selector
button so that "TAPE" appears
TAPE
on the display.
2
Press and hold down the [TAPE]
input selector button until "MD"
TAPE
appears on the display (about 3
seconds).
]
Note:
• To return to the original setting, while "MD" is being
displayed, press and hold down the [TAPE] input
selector button until "TAPE" appears on the display
(about 3 seconds).
]/[
]/[
-compatible Onkyo MiniDisc
VIDEO
1
VIDEO
2
VIDEO
3
VIDEO
4
VIDEO
5
TAPE
TUNER
PHONO
C D
NET AUDIO
DISPLAY
VCR
1
VCR
2
1, 2
]/[
]
MASTER VOLUME
PUSH TO OPEN