Hdmi Monitor Setup - Onkyo TX SR805 Instruction Manual

First Time Setup—Continued

HDMI Monitor Setup

2, 3
1, 6
PREV
CH
If you connect your TV to the COMPONENT VIDEO
OUT, set the HDMI Monitor setting to No so that the
onscreen setup menus are displayed and composite
video and S-Video sources are upconverted and output
by the COMPONENT VIDEO OUT.
If you connect your TV to the HDMI OUT, set the HDMI
Monitor setting to Yes so that the onscreen setup menus
are displayed and composite video, S-Video, and com-
ponent video sources are upconverted and output by the
HDMI OUT.
On the TX-SR875, you can specify the output resolution
for the HDMI OUT and COMPONENT VIDEO OUT
and have the AV receiver upconvert the picture resolu-
tion as necessary to match the resolution supported by
your TV.
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
RECEIVER
The main menu appears onscreen.
46
ON STANDBY
TV
INPUT
DVD VCR/DVR CBL/SAT
+
1 2 3
TV CH
GAME/TV AUX 1 AUX 2
-
4 5 6
TAPE TUNER CD
7 8 9
TV VOL
PHONO D. TUN
+10
0 CLEAR
--/--- 10 11 12
INPUT SELECTOR
MACRO
1 2 3 ZONE 3
REMOTE MODE
DVD VCR CD ZONE 2
CDR/MD
1
TV CABLE DOCK RECEIVER
SAT TAPE/AMP
DIMMER SLEEP
2–5
+
CH
VOL
ENTER
DISC
ALBUM
-
DISPLAY MUTING
REC RANDOM
PLAYLIST
LISTENING MODE
STEREO SURR
REPEAT AUDIO SUBTITLE PLAY MODE
PURE A DIRECT THX ALL ST
2
Use the Up and Down [
buttons to select "1. Input/Output
Assign," and then press
ENTER
[ENTER].
The Input/Output Assign menu
appears.
ENTER
3
Use the Up and Down [
buttons to select "1. Monitor
Out," and then press [ENTER].
ENTER
The Monitor Out menu appears.
1-1.Monitor Out
HDMI Monitor
Resolution Through
ENTER
( )
*
Note:
• The Resolution Through (
is not available on the TX-SR805.
4
Use the Up and Down [
buttons to select "HDMI Monitor,"
and use the Left and Right
ENTER
[ ]/[ ] buttons to select:
No: Select this if your TV is con-
nected to the COMPONENT
VIDEO MONITOR OUT, S
MONITOR OUT, or V MON-
ITOR OUT.
ENTER
Yes: Select this if your TV is con-
nected to the HDMI OUT.
Note:
• When Yes is selected, the onscreen
setup menus are output by only the
HDMI OUT. If you're not using the
HDMI OUT and select Yes by mis-
take and the menus disappear, press
the AV receiver's [HDMI OUT] but-
ton so that "HDMI Monitor: No"
appears on the display.
If you have the TX-SR805, press
the [SETUP] button to close
setup.
If you have the TX-SR875, con-
tinue with the next step.
]/[ ]
]/[ ]
Yes
) setting
*
]/[ ]