Specifications - Toro 41235 Operator's Manual

Displays the total volume in US gallons (US and TURF)
or liters (SI) that you have applied since you last pressed
the Reset calibration button for this setting.
Calibration Buttons
The monitor has the following buttons:
•
Reset
Resets the Total Volume, Sub Volume, Distance, Total
Area, and Sub Area display settings to 0.
•
Calibrate
Used to enter and exit the calibration mode.
•
Decrease
Reduces values displayed on the screen during calibration.
•
Increase
Increases values displayed on the screen during
calibration.
Calibration Settings
•
Boom Width
•
Units of Measure
•
Speed/Distance
•
Flowmeter

Specifications

Note: Specifications and design are subject to change
without notice.
Spray system base weight
Tank capacity
Overall vehicle length with the
standard spray system
Overall vehicle height with
standard spray system to the
top of the tank
Overall vehicle height with
standard spray system and the
booms stored in the X pattern
Overall vehicle width with the
standard spray system and the
booms stored in the X pattern
Optional Equipment
The Toro® Company has optional equipment and accessories
that you can purchase separately and install on your Workman.
Contact your Authorized Service Dealer for a complete list of
optional equipment that is currently available for your sprayer.
29
676 lb (307 kg)
200 US gallons (757 L)
166 inches (422 cm)
58 inches (147 cm)
92 inches (234 cm)
69 inches (175 cm)