Product Overview; Controls - Toro 41235 Operator's Manual

Product Overview

1. Power switch, Spray Pro™
monitor
2. Spray Pro™ monitor
3. Application rate switch

Controls

Spray Pro™ ™ ™ Monitor Power Switch
The Spray Pro monitor power switch is the On/Off switch
for the monitor. Press the switch to enable or disable the
Spray Pro monitor (Figure 33). When the switch is turned on,
a light on the switch illuminates.
Master Boom Switch
The master boom switch allows you to start or stop the spray
operation. Press the switch to enable or disable the spray
system (Figure 33). When the master switch is off, the Spray
Pro screen reads "Hold."
Boom Switches
The boom switches are located along the bottom of the
control panel (Figure 33). Toggle each switch upward to turn
the corresponding boom section on and downward to turn
them off. When the switch is turned on, a light on the switch
illuminates. These switches will only affect the spray system
when the master boom switch is on.
Figure 33
4. Rate lockout key switch
5. Master boom switch
6. Left boom switch
7. Center boom switch
8. Right boom switch
9. Left boom lift switch
Application Rate Switch
The application rate switch is located on the left side of the
control panel (Figure 33). Press and hold the switch upward
to increase the spray system application rate, or press and
hold it downward to decrease application rate.
Rate Lockout Key Switch
The rate lockout key switch is located on the lower, left
corner of the control panel (Figure 33). Turn the key
counterclockwise to the locked position to disable the
application rate switch, thereby keeping anyone from
accidentally changing the application rate. Turn the key
clockwise to the unlocked position to enable the application
rate switch.
Boom Lift Switches
The electric boom lift switches raise and lower their respective
booms (Figure 33). There is a left and right lift switch. Press
and hold the switch upward to raise the respective boom, or
press and hold the switch downward to lower the respective
boom.
25
10. Right boom lift switch