Maintenance; Recommended Maintenance Schedule(S); Daily Maintenance Checklist - Toro 41235 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
Before each use or daily
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Important: Refer to your Workman® ® ® and engine Operator's Manual for additional maintenance procedures.

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check Item
Check the brake and parking brake
operation.
Check the gear shift/neutral operation.
Check the fuel level.
Check the engine oil level before filling the
tank.
Check the transaxle oil level before filling
the tank.
Inspect the air filter before filling the tank.
Inspect the engine cooling fins before
filling the tank.
Check any unusual engine noises.
Check any unusual operating noises.
Check the tire pressure.
Check for fluid leaks.
Check the instrument operation.
Check the accelerator operation.
Clean the suction strainer.
Maintenance Procedure
• Clean the suction strainer. (More often when using wettable powders)
• Lubricate the pump.
• Lubricate the grease fittings.
• Lubricate the boom hinges.
• Inspect all hoses and connections for damage and proper attachment.
• Clean the flowmeter. (More often when using wettable powders)
• Grease the actuator rod bearings.
• Inspect the O-rings in the valve assemblies and replace them if necessary.
• Inspect the pump diaphragm and replace if necessary. (see an Authorized Toro
Service Distributor)
• Inspect the pressure dampener bladder and replace if necessary. (see an Authorized
Toro Service Distributor)
• Inspect the pump check valves and replace if necessary. (see an Authorized Toro
Service Distributor)
• Check boom actuator hydraulic oil for air bubbles.
• Inspect the nylon pivot bushings.
For the week of:
Mon. Tues. Wed. Thurs.
37
Fri. Sat. Sun.