Accessories; Padded Inserts; The Infant Safety Cushion; The Flexi Infant Safety Cushion - Britax safe-n-sound Instructions For Installation & Use

ACCESSORIES

PADDED INSERTS

There are 2 types of padded inserts.

The Infant Safety Cushion™

Is designed to snugly support baby for extra comfort and
must be used for small babies when Rearward-Facing.
Discontinue use when the Infant Safety Cushion™ insert is
a tight fit or creates discomfort for larger babies. Do not use
in Forward-Facing mode.

The Flexi Infant Safety Cushion™

Is designed to snugly support baby for extra comfort and
must be used for small babies. The insert adapts to a
wingless centre panel only; for use in forward facing mode
for a child whose shoulders are below the middle shoulder
height marker. The wings/side panels are easily detached
by releasing the press stud attachments. Discontinue use
when the insert is a tight fit or creates discomfort for larger
children.
TO REPLACE PADDED INSERT
A. Disconnect the buckle and place the insert under the
shoulder and lap straps.
B. Feed the crotch strap through the flap in the padded
Insert and re-connect buckle.
C. Tuck the flap underneath the padded insert.
If using the Flexi Infant Safety Cushion replace side
wings with press studs.
84
Instructions for Installation & Use