Placing Child Into Restraint - Britax safe-n-sound Instructions For Installation & Use

HOW TO USE

PLACING CHILD INTO RESTRAINT

A. Ensure the headrest and shoulder straps are adjusted to the correct height for your child (see page 45).
B. Lengthen the top tether strap and allow the straps to fall to the sides of the restraint for easier access to
the child.
C. Release and lengthen the shoulder straps by pressing the harness adjuster and pulling both shoulder
straps evenly. Pull out to the desired length.
D. Place the two harness tongues into the Buckle Tongue Holder.
E. Place child into restraint lying on its back so that the buckle is between their legs. Ensure that child's
arms and legs are free.
Harness shoulder
straps
Harness Tongue Holders
46
Instructions for Installation & Use
Adjuster for
the top tether
strap
Pull Adjustment Strap
to tighten the harness
Adjuster Strap
Press Harness
Adjustment Button
to release and
lengthen the
harness
Lengthened top
tether strap
D