Britax safe-n-sound Instructions For Installation & Use page 52

HOW TO REMOVE
D. To store the stabilising bar; place seat in the upright
position. Lift the front flap at the end of the seat, to
uncover the stabilising bar storage recess.
E. Press the button on left side (facing seat), to unlock
stabilising bar. Gently rotate and push down into the
recessed area.
F. Re-attach the front flap at the end of the seat.
G. The child restraint is now disconnected.
H. The restraint will need to be in the upright position to
access the ISOFLEX storage location or if changing to
forward facing mode see page 61. Store the ISOFLEX
connectors in the storage location at the rear of the
seat. Close the covers on the storage locations.
52
Instructions for Installation & Use
1. Button under trim
E
Stabilising
bar
2. Rotate backwards
Front
flap
3. Then
push
inwards
E