Lap Only Seatbelt - Britax safe-n-sound Instructions For Installation & Use

HOW TO INSTALL USING SEATBELT
G. Refit the comfort foam over the tensioned seatbelt installation.
For smaller babies replace the Infant Safety Cushion™.
Some models may utilise the Flexi Infant Safety Cushion which
utilises detachable side panels.
Do not use the Infant Safety Cushion™ if the child's shoulders
reach the lower shoulder height marker unless the side panels
are detachable. Detach the side panels, leaving only the
central panel in use or remove the Infant Safety Cushion™
for longer use whilst still rear facing. Refit the Infant Safety
Cushion™ by feeding the buckle and EZ buckle through the
aperture in the Infant Safety Cushion™. Ensure the shoulders
straps are accessible.

LAP ONLY SEATBELT

If using the restraint in a seating position with a lap only
seatbelt follow all instructions as above, ensuring the
child seat is against the vehicle seat back and lock-off
both straps in the lock-offs on both sides.
Follow top tether installation instructions on page 38.
IMPORTANT:
TETHER HOOK AND REMOVE SLACK IN THE TOP
TETHER STRAP.
34
Instructions for Installation & Use
ALWAYS ATTACH TOP
Rear facing
seatbelt lock-
off. Sash belt
side clamps
lap belt
portion only
Rear facing
seatbelt lock-
off. Buckle
side clamps
both lap and
sash seatbelt.