Britax safe-n-sound Instructions For Installation & Use page 37

HOW TO INSTALL USING ISOFLEX CONNECTORS
F. Engage the ISOFLEX connectors with
each ISOFIX low anchorage. A click may
be heard and a green indicator will show
on the top of the ISOFLEX connector
when it has engaged. Pull each strap to
ensure both lower anchorage connectors
are engaged.
NOTE: Pull against the ISOFLEX connector
to verify that it is secure.
G. Push downwards on the side of the
restraint to compress it into the vehicle
seat. Whilst pushing down on the seat,
pull on the adjuster strap to remove all
slack and tighten. Repeat for the adjuster
strap on the other side of the restraint.
H. The two tension indicators will show
'green' indicating adequate tension has
been applied.
I. Connect the top tether as described on
page 35 to 38.
IMPORTANT:
Do not attach the lower attachment connectors of
two separate child restraints to the same ISOFIX low
anchorages in your car.
Always attach the top tether strap to the child restraint
upper anchorage in your car.
Child restraint lower attachment connectors and the ISOFIX
low anchorages in your car are designed to withstand only
those loads imposed by a correctly fitted child restraint.
F
Pull ISOFLEX adjuster
strap to tighten
Tension indicators
Instructions for Installation & Use
G
H
37