How To Install - Preparations; Installing Into Vehicle Forward Facing (Upright Or Reclined) - Britax safe-n-sound Instructions For Installation & Use

HOW TO INSTALL - PREPARATION
INSTALLING INTO VEHICLE FORWARD FACING
(UPRIGHT OR RECLINED)
A. Store the stabilising bar by lifting the front flap at
the end of the seat to uncover the stabilising bar
storage location.
C. Press the blue button on left side (facing seat), to
unlock the stabilising bar. Gently rotate and push
down into the recessed area.
D. Re-attach the front flap at the end of the seat.
A. Remove the Infant Safety Cushion™ or detach the
side panels from the Flexi Infant Safety Cushion™
for continued use. Refer to page 83.
IMPORTANT:
DO NOT USE RESTRAINT IN FORWARD-FACING POSITION
WITH THE STABILISING BAR PULLED OUT.
Do not recline into rearward facing position when using
restraint in forward facing mode.
60
Instructions for Installation & Use
1. Button under trim
Stabilising
bar
2. Rotate backwards
Front
flap
3. Then
push
inwards