Britax safe-n-sound Instructions For Installation & Use page 47

Table of Contents

Advertisement

IMPORTANT :
CAUTION:
Do not harness an infant wrapped in a blanket or swaddled as this increases the risk of ejection and
injury or death in a crash. The harness needs to fit firmly to the baby, any blanket or other covering may
be placed over the harness after the harness is adjusted. Arms and legs must be free and not bound.
The legs must sit on each side of the crotch strap.
E. Fit either harness tongue into the harness buckle followed by the other tongue. A click is heard when
the last tongue is fully engaged.
Should the second tongue not engage - press the red button and reinsert the tongues. Ensure secure
engagement by pulling harness straps. If the harness buckle does not engage correctly then it may
require cleaning or seek replacement - refer to page 78. The buckle tongues are fully engaged when
both tongues are inserted and a 'click' is heard.
Tongue
Always adjust the height of the shoulder straps as the child grows.
Buckle
HOW TO USE
Click
Pull to remove slack from
harness lap straps
Instructions for Installation & Use
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Platinum proMillenia

Table of Contents