How To Install Using Seatbelt; Installing Into The Car - Britax safe-n-sound Instructions For Installation & Use

HOW TO INSTALL USING SEATBELT

INSTALLING INTO THE CAR

USING SEATBELT AND TOP
TETHER
Prepare the child seat by placing into recline
mode as detailed on page 31 'INSTALLING INTO
VEHICLE REARWARD FACING'.
A. Lengthen the harness by pressing the
harness adjustment button while pulling both
shoulder straps. Always pull straps together
to avoid creating slack in the straps.
B. Undo the buckle and place the buckle
tongues in the Harness Tongue Holders on
each side of the cover.
C. Place the rearward facing restraint in the
chosen seating position with the vehicle
Seat Protector™ positioned centrally to that
position. Ensure the child seat is against the
vehicle seat back. The stabilising bar does not
need to be in contact with the vehicle seat,
but must be extended and locked.
D. Remove the Infant Safety Cushion™. Lift
centre panel flap to expose the comfort pad
from the seat shell. Lift the comfort pad from
the seat shell.
32
Instructions for Installation & Use
Pull to lengthen
Push
Harness
Adjustment
Button
Harness Tongue Holders
Infant Safety Cushion™
Vehicle Seat Protector™
A
B
Centre panel flap
D