Angular Adjustment Of Restraint - Britax safe-n-sound Instructions For Installation & Use

HOW TO INSTALL TOP TETHER

ANGULAR ADJUSTMENT OF RESTRAINT

Some vehicle seats have more rearward slope than others. If the angle of the seat causes the child to
be too upright for comfort, the angle may be altered by placing firm packing between the seat and the
underside of the base. Packing can be a firmly rolled up towel.
Do not remove all of the rearward slope by over packing. Always leave a rearward slope angle of
approximately 10 to 15 degrees as shown
10° to 15°
Illustration shows child seat installed with seatbelt. Also applicable to an ISOFLEX installed variant.
42
Instructions for Installation & Use
The stabilising bar
does not need to
contact the car
seatback.