Introduction - Britax safe-n-sound Instructions For Installation & Use

INTRODUCTION

To be used with a lap-sash or lap only seatbelt or ISOFIX low anchorages in the back of most cars with
forward facing seats.
The child should not sit in this restraint in the forward facing mode until their neck muscles are able to
support their head. Britax recommends that you keep your child in a rearward facing restraint for as long as
possible (or until the appropriate shoulder height marker is reached between 12 months and 2yrs approx).
No child restraint can guarantee absolute protection from injury in every crash. However, to ensure
that your child gets all the protection that this restraint is designed to provide, PLEASE READ AND
FOLLOW THESE INSTRUCTIONS EXACTLY and use only Britax Safe-n-Sound recommended parts and
accessories.
Carefully read all the instructions for installation in this book. If in doubt about the method of installation,
consult a Britax agent or a child restraint fitter. In New Zealand consult the agent for the vehicle.
Regional Road Rules may prohibit the use of this restraint in the front seat until the child is 4 years of age.
Check your Regional Rules for exemptions.
Always store the instruction book in the pocket provided on the side of the cover.
14
Instructions for Installation & Use
Your seat features Side Impact Cushion Technology™ (SICT) you
can see the Side Impact Cushion fitted on the sides of the seat. There
is no installation or assembly required to activate the Side Impact
Cushion, it functions in a side crash to provide additional protection to
the occupant.
Your seat features ISOFIX Compatible Connectors. There will be
straps fitted to each side of the lower part of the seat. Refer to page 28.
Britax flexible strap ISOFIX Compatible connector technology is
known as ISOFLEX.