Mounting The Camera (Optional Vhs Adaptor) - Vinten Vision 6 Maintenance Manual

Contents

Mounting the camera (optional VHS adaptor)

9 The optional VHS adaptor
connected by a plastic link. To mount the camera using the VHS adaptor, proceed as follows:
9.1 Remove the slide plate
lock release (12)
(22)
(5)
(16)
(Fig 2.2) consists of a VHS pin and a 1/4 in. BSW camera mounting screw
(12) from the head by releasing the slide clamp (6), pressing the slide
and pulling the plate to the rear.
Fig 2.2 Optional VHS adaptor
First Previous Next
Page Page Page
Previous
View
(12)
(6)
16