Adjusting The Horizon Level; Mounting The Camera - Vinten FH155 Manual User Manual

Adjusting the Horizon Level

Using a 5 mm Allen key, tighten the jacking screw underneath the
mounting plate to adjust the horizon level of the payload. Loosen the
jacking screw before adjusting the height of the mounting plate.

Mounting the Camera

1. Apply the tilt lock.
Using a 5 mm Allen
key, remove the three
centre screws securing
the camera cradle and
set the camera cradle
to its lowest position.
2. Secure the cradle in
position. Adjust the
jacking screw as
required to level the
horizon.
Installation
11
13