Fig 4.1 Battery Replacement - Vinten Vision 6 Maintenance Manual

Contents
Battery replacement
7 The level bubble is illuminated by pressing the switch. It remains lit for approximately 15 seconds.
8 The battery should be replaced yearly or whenever the illumination is considered inadequate.
WARNING!: If a payload is not fitted to the head, turn the balance knob
clockwise to reduce the balancing force before tilting the head forwards.
9 To replace the battery
9.1 Tilt the head forwards to allow access to the battery cover
9.2 Prise off the battery cover (11).
9.3 Pull the battery
9.4 Push the replacement battery into the battery compartment, observing the correct polarity.
9.5 Refit the battery cover (11).
9.6 Press the switch
(15)
(4)
(Fig 4.1):
(11.1) out of the battery compartment.
(8) and ensure that the level bubble

Fig 4.1 Battery replacement

First Previous
Page Page
(11) and apply the tilt brake (15).
(4) is lit for approximately 15 seconds.
Next Previous
Page View
(2) full counter-
(11)
(11.1)
(2)
(8)
22