Adjusting The Image Position - Canon WUX500ST User Manual

Focusing, Resizing, or Moving the Image
■ Adjusting Image Focus
To adjust the focus, turn the focus ring.
Images will waver as you turn the focus ring. Hold the focus ring on top and bottom and
turn it slowly as you adjust the focus.

■ Adjusting the Image Position

Turn the lens shift dials to adjust the projected image vertically or horizontally.
Called "lens shift," this adjusts the projected image into position by moving the lens
up, down, left, or right.
• Instead of adjusting where the image is projected, you can also move the image itself.
For details, refer to "Digital image shift" (P96).
• You can fine-tune the image position by turning the upper part of the upper lens shift
dial or the lower part of the lower lens shift dial.
Vertical lens shift dial
(2)
(3)
Horizontal lens shift dial
(1) Turning upper lens shift dial clockwise:
(2) Turning upper lens shift dial counterclockwise:
(3) Turning lower lens shift dial clockwise:
(4) Turning lower lens shift dial counterclockwise:
For details on lens shift, refer to "Lens Shift Function" (P41).
(1)
(4)
53
Projection Procedure
Focus ring
Focus
adjustment
Moves the image up.
Moves the image down.
Moves the image right.
Moves the image left.