Adjusting The Image Position - Canon WUX5000 User's Manual & Installation Manual

Adjusting the Image

Adjusting the Image Position

To adjust the screen position up, down, left, or right, press the LENS-SHIFT button
(WUX5000 / WUX4000) or SHIFT button (WX6000 / SX6000) on the remote control, or the
LENS button on the projector. This function is referred to as "lens shift". It can change the
projected screen to the most suitable position by moving the position of the lens up/down/
left/right. (P160)
• The available range for lens shift (percentage of movement relative to the screen size) var-
ies depending on the lens unit which is used. (P161)
• There are areas where each lens is unable to move. With the Short Fixed Lens (RS-
IL03WF), the areas are at the four corners and for the other lenses, the areas are at the top
left and bottom right. (P161)
1
Press either the LENS-SHIFT button (WUX5000 / WUX4000) or the SHIFT button
(WX6000 / SX6000) on the remote control, or the LENS button on the projector 3
times in order to display the window shown below.
* If the Short Fixed Focus Lens (RS-IL03WF) is attached, when the LENS button on
the projector is pressed twice, the window below will be displayed.
Remote control
Downloaded From projector-manual.com Canon Manuals
Projector
Push three times*
74
Remote control