Selecting An Image For Projection - Canon WUX7500 User Manual

Convenient Projection Features

■ Selecting an Image for Projection

This section describes the steps for selecting an image in the USB file browser and
projecting on the screen.
Selecting a Drive
This step may not be necessary when a USB flash drive is connected directly to the
projector's USB port.
If a USB memory card reader having multiple memory slots is connected, the drive
(memory slot) list is displayed in the file list.
Select the drive in which the memory card is inserted with [ ] / [ ], and press the
OK button.
• Active drives are displayed in white text, while inactive drives are grayed out.
Selecting a Folder
Folders that contain images can be selected.
• To return to the higher level, select [
Selecting an Image File for Projection
In list view, when you select an image file, a small preview of the image is shown in
the preview area.
For full-screen projection of the image, press the OK button.
To return to the higher level, select [
Changing the View
To switch the view, select [Thumbnail view] or [List view] in the Drive/file list and
press the OK button.
■ Controlling Images in Full-Screen Projection
When images are projected, you can perform the following operations.
Project the previous or next image by pressing the [ ] / [ ] buttons.
Rotate images left or right 90° by pressing the [ ] / [ ] buttons.
Return to the USB file browser by pressing the OK button.
• These operations are also available during slideshows. (Except when [Animation
effect] is enabled.)
• If the image contains rotational information, the image is rotated to an appropriate
direction automatically.
■ Running a Slideshow of Data Saved in a USB Flash Drive
Multiple images on a USB flash drive can be projected consecutively, with each
shown for a specific interval.
Setting a Slideshow Interval
Set the projection interval in [Slideshow interval] (P130) in the menu.
].
].
57