Terminal - Canon LH-WU350UST User Manual

Name and function of your projector

Terminal

1
7
1 COMPUTER-1 terminal
Connect the output signal from the computer
to this terminal.
2 COMPUTER-2 terminal
Connect the output signal from RGB to this
terminal.
3 LAN terminal
Connect mesh cable to this terminal when
using network control and operate your
projector.
4 HDMI-1/HDMI-2 terminal
Connect HDMI1 digital output signals or
HDMI2 digital output signals to this terminal.
5 USB B terminal
When using the "USB display" function,
connect your computer to this terminal via the
USB cable.
6 USB A terminal
When using the Memory Viewer function,
insert the USB memory directly to this
terminal. USB power supply 5V/1.5A.
7 CONTROL terminal
Select the control function to operate the
2 3
9 10 11
projector, connect the serial communication to
this terminal.
8 Anti-theft slot
An anti-theft wire cable (not included) can be
connected to help users to deter theft of the
projector.
9 MONITOR OUT terminal
For monitor output , output the signal from 1 and
2 to other monitors.
10 VIDEO terminal
Connect the Video output signal to this interface.
11 MONO(L/R) terminal
A MoNo audio signal (A single AUDIO terminal)
should be connected to the MONO (R / L)
interface.
12 AUDIO OUT terminal
Connect external audio devices to this terminal.
13 AUDIO IN terminal
Connect audio signal of the PC to this terminal.
14 Remote Receiver (side)
Use the remote control to operate the projector.
24
4 5 6
12 13 14
8