Specifying The Lamp Mode; Resetting Image Adjustment Settings - Canon WUX450 User Manual

Specifying the Lamp
Mode
> [Image adjustment] >
HDMI Component
Digital PC Analog PC
Reducing the lamp brightness
reduces power consumption and
cooling fan noise.
You can access the [Lamp mode]
menu by pressing the ECO button on
the remote control.
Full Projects images at full
power brightness.
Power Reduces lamp brightness to
saver save energy.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Full power].
• The adjustment you have made is stored as
adjusted values for the input signals and
image mode of the current projection.
Adjusting Image Quality (Image Adjustment)
Resetting Image
Adjustment Settings
[Lamp mode]
LAN
USB
You can reset the current image
adjustment settings to the default
settings. If reset is performed when
user setting 1–5 is selected for
[Image mode], the settings are
returned to the settings that were
saved in [User 1–5].
OK
Cancel Cancels resetting of the image
• Only the setting for the combination of input
signal and image mode for the current
projection is reset.
107
> [Image adjustment] >
HDMI Component
Digital PC Analog PC
Resets the image adjustment
settings.
adjustment settings.
[Reset]
LAN
USB