Lamp Mode - Canon WUX500 User Manual

Menu Description

Lamp mode

> [Image adjustment] >
Reducing the lamp brightness reduces power consumption and cooling fan noise. It
can also be displayed by pressing the ECO button on the remote control.
Submenu
Full power Projects images at full brightness.
Power saver Reduces lamp brightness to save energy.
Reset
> [Image adjustment] >
Restore the current image quality settings to defaults.
Submenu
OK Resets the image adjustment settings.
Cancel Cancels resetting of the image adjustment settings.
• Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will
restore the settings originally saved for that user profile.
• Only the setting for the combination of input signal and image mode for the current
projection is reset.
Image priority
> [Image adjustment] >
Select which side image adjustment settings to apply in split-screen mode.
Submenu
Use the side with control rights as the [Primary] side. For image
Primary adjustment settings that are not configured separately, [Primary] side
settings apply to both sides.
You can only switch from [Secondary] to [Primary]. Cannot be selected
Secondary directly. To reverse the side used for image adjustment, switch control
rights to the other side and select [Primary].
• Can be independently configured
Brightness (P78), Contrast (P78), Gamma (P78), Color adjustment (P78), Fine-Tune
Gamma (P81)
• [Primary] setting also applies to [Secondary]
Image mode (P77), Advanced adjustment except Fine-Tune Gamma
mode (P82)
[Lamp mode]
[Reset]
[Image priority]
82
Function
Function
Function
(P79 - P81), Lamp