Safety Measures During Operation; Safety Devices - Optimum OPTIdrill DH 24BV Operating Manual

1.8

Safety measures during operation

CAUTION!
Risk due to inhaling dusts and mist hazardous to health.
Dependent on the material which need to be processed and the used auxiliaries dusts
and mist may be caused which might impair you health.
Make sure that the generated health hazardous dusts and mist are safely sucked off at
the point of origin and is dissipated or filtered from the working area. To do so, use a
suitable extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Before processing inflammable materials (e.g. aluminium, magnesium) or using
inflammable auxiliary materials (e.g. spirit) it is necessary to take additional preventive
measures in order to safely avoid health risks.
1.9

Safety devices

Use the drilling machine only with properly functioning safety devices.
Stop the drilling machine immediately if there is a failure on the safety device or if it is not func-
tioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the drilling machine must only be used if you
the cause of the fault has been eliminated,

you have verified that there is no danger to personnel or objects.

WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other personnel working with the drilling machine. The
possible consequences are:
injuries may occur due to workpiece or parts of workpieces flying off,

contact with rotating parts,

fatal electrocution,

The drilling machine machine includes the following safety devices:
an EMERGENCY STOP push button,

a drilling table with T-slots to fix the workpiece or a vice,

a drill chuck guard, in order to prevent interference with the rotating tool.

WARNING!
The separating protective equipment which is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely. Always work carefully and observe
the limit values of your chipping process.
Safety
Version 1.1.3 - 2020-07-23
DH24BV | DH28BV | DH34BV | DH40BV
Translation of original instruction
EN
13