Operator Positions; Safety Measures During Operation; Safety Devices - Optimum Opti drill B 24H Operating Manual

1.6

Operator positions

The operator position is in front of the drilling
machine.
1.7

Safety measures during operation

CAUTION!
Danger due to inhaling dust and mist that are hazardous to health.
Depending on the materials to be machined and the agents used, dusts and mists can
arise that are detrimental to health.
Ensure that the harmful dust and mist generated are safely sucked off at the point of
origin and routed away from the working area or filtered. To do so, use a suitable
extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Extra precautionary measures must be taken before machining flammable materials (e.g.
aluminium, magnesium) or using combustible agents (e.g. spirit) to avert a health
hazard.
1.8

Safety devices

Use the drilling machine only with properly functioning safety devices.
Stop the drilling machine immediately, if a safety device fails or is faulty or becomes ineffective.
It is your responsibility!
If a safety device has been activated or has failed, the drilling machine must only be used if you
the cause of the fault has been eliminated,

you have verified that there is no danger to personnel or objects.

WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other personnel working with the drilling machine. The
possible consequences are:
injuries due to components or workpieces flying off at high speed,

contact with rotating parts,

fatal electrocution.

WARNING!
Although the isolating safety devices provided and delivered with the machine are
designed to reduce the risks of workpieces being ejected or parts of tools or workpieces
EN
B24H | B24HV | B28H | B28HV
82 Translation of the original instructions
Img.1-1: Operator positions
Version 2.2.6 - 2022-04-07
Safety